Flux Black Anodized Standard LCG TVP Kit

52.33€

Product may vary slightly from image representation.
  • Model:Flux-STDkit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - based on standard HPI Flux Length TVPs but 4mm Thick.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: Standard Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
Based on standard flux tvp length so no body shell changes needed a direct 100% replacement
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):260grams
Skid Plate & Braces: 90 grams

.:Included:.
2x TVPs (Left & Right)
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x Baja Rear Lower Brace 2 Blue - 874791 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x M5 Captive Nuts / T Nuts - Bag101 x Baja Bush Set - Black1 x 26cc piston (34mm) - For 0.7mm Ring1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws3 x Baja Diff Cup side screws1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x Innovative-RC Hoodie - Size Large1 x Carburetor Set WT6681 x 1x Losi Muggy Diff Cup - Black1 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x Flux Standard LCG TVP Kit5 x O-Ring Diff Cups - 5.5x2mm1 x Pull Start Thumb Screws1 x M4x10 Countersunk Socket head cap screws - bag 101 x Rear Big Bore Shocks - Losi 5ive Black1 x Carburetor Gasket1 x 4-40x1/2 Socket Head Cap Screw - Bag 102 x 10x16x0.5 Steel Shim - Pack 101 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x F270 4Bolt With Filter, Pullstart & Carb1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Roll Bar for HPI Savage 3mm1 x Baja Upper Front Arm Brace Black Anodized 7075-T62 x Holts Brake Cleaner2 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver2 x Short Big Bore Rod Ends - M81 x 26cc (34mm) Cylinder Head - 2 Bolt1 x M3x35 Socket head cap screws - bag 101 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x 2x 3mm Top Mount Brackets1 x HPI MT2 Diff Cup Case Silver - 2x1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long2 x M4 Nylock nut bag of 201 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x 4x 5x10x4mm Ball Bearing Metal Shield- B0212 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x 10x16x0.1 Steel Shim - Pack 101 x 2x 15x24x5mm Flanged Ball Bearing Metal Shield1 x Crankcase engine Seal set - Viton type1 x IRC Front MID Front big bore springs - Losi 5T2 x Baja Diff o-rings - bag101 x 1x Losi 8ight-T Diff Cup - Black1 x Rear Heavy Duty losi Shock Shaft - 8mm2 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Baja Upper Front Arm Brace Upper Blue1 x G290RC Petrol RC Engine - 2 Stroke1 x Engine Piston Stopper1 x Flux Black Anodized +6mm Front LCG TVP Kit2 x M6 Rod Ends - Right hand thread1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32123 x HPI Savage Screw kit (all models) - High tensile1 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x Innovative-RC T-Shirt - Size Large1 x Center Tower to Clutch suport brace V1.01 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Servo Y Lead JR, Futaba, Hitec etc1 x differential cross pins TT MT4 - 2x1 x Titanium Exhaust Wrap1 x Baja Rear Lower Brace 2 - 874791 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x M3x8 Socket head cap screws - bag 102 x 4x8x0.3 Steel Shim - Pack 102 x CVD inner Drive set Pins 5x22mm1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x IRC Red UHD Front big bore springs - Losi 5T1 x High Response Clutch Spring - Red1 x Big Bore Shock 2 Hole Piston1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Cleon MMX stiffening chassis side panels - Black1 x 10x16x0.3 Steel Shim - Pack 102 x 2x Flanged 10x6x3mm1 x 1x Losi Muggy Diff Cup - Silver1 x Cleon MMX stiffening chassis side panels - Red1 x 8x Shock Standoffs - Buggy Shocks1 x T PushFit Connector 4mm2 x Big Bore Shock 3 Hole Piston DUAL Rate1 x 4-40x3/8 Button Head socket Screw - Bag 101 x Big Bore Shock Body All Colours - Losi Front2 x 6x12x0.3 Steel Shim - Pack 101 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Big Bore shock Spring Retainers - Aluminium1 x IRC Hing Pins Rear Top V2 - 866351 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x Rear Big Bore Shocks - Losi 5ive Silver1 x Losi 5ive-T 2.0 servo single arm V2.01 x 5x10x0.3 Steel Shim - Pack 101 x Innovative-RC Hoodie - Size Small1 x Innovative-RC Hoodie - Size XXXX Large1 x IRC RX Box Set - MT41 x 6x Screw Shaft M4x2x12mm1 x HPI Baja Front Upper Plate 4mm RED - 874841 x Center Tower to Clutch suport brace V2.01 x Engine Clutch bottom spacer 6.5mm - 875711 x CRT Chassis Gaskets2 x Big Bore shock Spanner1 x 4mm Nylon brake pipe1 x Losi 5T 5B Shock Towers - Front1 x CRT Tower Set - Nickel1 x Losi DBXL front & rear shock end ball1 x Losi 5ive Spring Retainers1 x 10x 3.5mm Body Clip - Rpin1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x Outdrive cup shaft Orings1 x CRT Tower Set - Silver1 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x X Upgrade Kit1 x 2x 10x15x4mm Ball Bearing Metal Shield- B0301 x Losi Titanium Grade 5 King Pins B20741 x Innovative-RC Hong Nor CRT Chassis - Silver1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x 2x Flanged Rubber Shield 10x6x3mm
Reviews
Flux Standard LCG TVP Kit
Flux Standard LCG TVP Kit
52.33€

had these a while now and have done some proper hard bashing...