Flux Black Anodized 1"+6mm LCG TVP Kit

£65.00

Product may vary slightly from image representation.
  • Model:Flux-1_6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 1Inch Rear 6mm Front Extended over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: 1inch Rear & +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
1inch Rear using Innovative-RC 1inch Dogbone (I-RC part# 61210)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):293grams
Skid Plate & Braces: 100 grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
3 x M6 Rod Ends - Right hand thread1 x Baja Shock spring retainer - Heavy Duty Springs1 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T1 x Front Big Bore Shocks - Losi 5ive Red2 x Front Big Bore Shocks - Losi 5ive Silver1 x 2x Flanged 10x6x3mm1 x M5 Hank rivet bush - Bag102 x UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x I-RC Front Baja Big Bore shock Spring - Progressive1 x M4x30 Socket head cap screws - bag 101 x Black Shock Spring Adjuster Ring4 x Losi DBXL front & rear shock end ball1 x IRC Red UHD rear big bore springs - Losi 5T1 x I-RC Baja Big Bore rear shock Spring - Stock1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm3 x Big Bore Shock 2 Hole Piston1 x Baja Shock Spring Retainer - LST3 x Big Bore Shock 5 Hole Piston6 x Losi 5ive Spring Retainers3 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H3 x Big Bore Shock 3 Hole Piston DUAL Rate2 x Big Bore Shock 2 Hole Piston DUAL Rate1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V23 x Big Bore Shock Blank Piston5 x Baja Shock Top Mounts - Front6 x Losi 5ive Spring Adjuster Ring2 x Baja Big Bore Shock O-Ring Kit3 x DBXL Top shock cap Bush 5mm2 x Big Bore Shock 4 Hole Piston3 x Big Bore shock Spanner3 x Front Heavy Duty losi Shock Shaft - 8mm3 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec3 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M3 x Big Bore Shock 3 Hole Piston4 x Big Bore Shock Body All Colours - Losi Front1 x Rear Heavy Duty Baja Shock Shaft - 8mm4 x Losi 5ive Front and rear shock end ball2 x Motorex Air Filter Oil - spray1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x Baja Diff Cup side screws3 x Big Bore Shock 4 Hole Piston DUAL Rate2 x Clear Anodized Shock Cap - Silver3 x Big Bore Shock 5 Hole Piston DUAL Rate2 x Rear Big Bore Shocks - Losi 5ive Black3 x IRC BLACK MID rear big bore springs - Losi 5T3 x Losi 5ive top shock mounts1 x M6 Rod Ends - Left hand thread1 x ProLux Light Weight rebuildable fuel filter - large1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Rear Fuel tank plate support bracket1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x 1x Losi Muggy Diff Cup - Black1 x ProLux Stone Fuel Filter - RED2 x IRC Hing Pins Full Set V2 - 10Pins1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x ProLux Stone Fuel Filter - Grey1 x Ofna 250cc Fuel Tank Mounts1 x Innovative-RC Foam Filter Oil - 100ml1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x IRC Red UHD Front big bore springs1 x IRC Red UHD Front big bore springs - Losi 5T1 x 6x Differential Gaskets1 x Holts Brake Cleaner1 x losi 5ive diff inserts1 x Air Filter Gasket1 x Silkolene - Foam Filter Oil 1L1 x 8x Shock Standoffs - Buggy Shocks2 x IRC Front MID Front big bore springs - Losi 5T1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Losi 5T 5B Shock Towers V2 - Rear1 x Thunder Tiger Differential Case MT4 G3 - Red1 x Baja Shock Spring Retainer - Slotted1 x 2x Savage Diff Cup Case1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon2 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x Losi 5ive Diff Gaskets - 6x1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x HPI Baja Screw Kit (all models) - High tensile1 x M8 Rod Ends for Big Bore Shocks1 x Losi Titanium Grade 5 King Pins B20741 x Rear Big Bore Shocks - Losi 5ive Red1 x Outdrive cup shaft Orings1 x Rear Big Bore Shocks - Losi 5ive Silver1 x HPI Savage Screw kit (all models) - High tensile1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x I-RC Losi Big Bore front shock Spring - 26.5lb1 x Shock Bleed Screw - 4x1 x Front Big Bore Shocks - Losi 5ive Blue1 x Baja Shock Top Mounts - Rear1 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks
Reviews
Flux Standard LCG TVP Kit
Flux Standard LCG TVP Kit
£45.00

had these a while now and have done some proper hard bashing...