Flux Black Anodized 1"+6mm LCG TVP Kit

$81.12

Product may vary slightly from image representation.
  • Model:Flux-1_6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 1Inch Rear 6mm Front Extended over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: 1inch Rear & +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
1inch Rear using Innovative-RC 1inch Dogbone (I-RC part# 61210)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):293grams
Skid Plate & Braces: 100 grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x O-Ring Diff Cups - 5.5x2mm1 x Clear Anodized Shock Cap1 x Out Drive Cup Pins - Bag 61 x 23cc Piston Rebuild Kit Set (32mm)1 x IRC Hing Pins Full Set V2 - 10Pins1 x 27cc Piston Rebuild Kit Set (35mm)3 x M4x4 Grub Screws1 x Baja Diff o-rings - bag101 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x Losi 5T 5B Shock Towers Bash - Rear BLACK2 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 2x 20x32x7mm Ball Bearing Metal Shield- B0941 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Thunder Tiger Differential Case MT4 G3 - Red1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x Short Big Bore Rod Ends - M81 x CVD Drive set Pins 4x20mm B65601 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x Servo Y Lead JR, Futaba, Hitec etc1 x Flux Standard LCG TVP Kit1 x 50x 6mm Body Clip Bulk - Rpin1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x IRC Red UHD rear big bore springs1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc2 x M3 Spring Washer Zinc plated - bag 201 x 1000mm (1M) Heavy Duty Servo Lead JR, Futaba, Hitec1 x Flux Black Anodized Standard LCG TVP Kit1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x CRT Tower Set - Nickel1 x CVD Pin rebuild kit - B32171 x 4mm flexable brake pipe1 x Losi 5ive Engine mount inserts - #201 x 10x 6mm Body Clip - Rpin1 x HPI Baja Rear Lower Brace Blue - 874801 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x M3 washers - Zinc plated bag 201 x Shock Cap O-Ring Spacers1 x X Arm shock mounts - 4x1 x IRC Red UHD Front big bore springs1 x IRC Hing Pin screw & washer set1 x 2x 12x24x6mm Bll Bearing Metal Shield- B0891 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x HPI Baja Front Upper Plate 4mm Blue - 874841 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x MCD Fork Ends set 4 - M61 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0942 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x M4 Washer Zinc plated bag 201 x M5 Spring Washer Zinc plated - bag 201 x 2x Losi LST1 & LST2 Diff Cup - Black2 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x Steering Crank shaft1 x 4mm Nylon brake pipe1 x Rear Big Bore Shocks - Losi 5ive Red1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Losi 5T 5B Shock Towers Bash - Front RED1 x M6 Rod Ends - Left hand thread1 x CRT Chassis Gaskets1 x HPI Baja Brake Calliper - Blue Anodized1 x Losi 5ive Engine mount inserts - #191 x M4 Nylock nut bag of 202 x M4x30 Socket head cap screws - bag 101 x O-Ring Diff Cups - 9.5mmx2.5mm1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x Big Bore shock Spanner1 x M5 washers - Zinc plated bag 201 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x Losi 5ive-T 2.0 servo single arm V2.01 x Baja Front Upper Brace Blue - 87481
Reviews
Black Anodized Roll Bar
Black Anodized Roll Bar
$16.21

Super strong, yet suprisingly light at the same time... Fitt...