Innovative-RC HPI Baja 5B 5T enclosed chassis - BLUE

£120.00

Product may vary slightly from image representation.
  • Model:87477-BL
Available Options
Live Stock Check: 0 units
Share This Product

 

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Pre installed Reivets for under chassis brace

 

 

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x 8x Shock Standoffs - Standard Shocks3 x Shock Cap O-Ring Spacers1 x 2x Nitro Silicone Switch Cover - Futaba etc2 x I-RC Front Baja Big Bore shock Spring - Progressive2 x M8 Rod Ends for Big Bore Shocks2 x MT4 Chassi Gaskets - 6x1 x CY Pull Start Assembly1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x M4x12 Countersunk Socket head cap screws - bag 101 x Brake pad screws - M4 Tower to IRC pads1 x 2x Top shock support brackets - Savage x2 x HPI Baja Brake Calliper - Blue Anodized2 x Left Spacer - 875711 x HPI Baja Rear Brace 4mm Black Anodized - 874882 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x Shock Tower Brace - Silver1 x I-RC Losi Big Bore rear shock Spring - 66lb3 x Pull Start Thumb Screws1 x IRC Hing Pins Full Set V2 - 10Pins1 x Right Clutch Spacer - 875551 x Baja Shock Top Mounts - Rear1 x Baja HPI B094: Ball Bearing 20x32x7mm1 x Torx Screw Kit Elcon etc - High tensile Steel1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x CY +2mm Stuffer Stroked Crank set1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x Rear Chassis Plate 7075-T6 V3 RED - 874821 x Center Tower to Clutch suport brace V2.01 x Left Spacer Black - 875711 x CY 2 Bolt Gasket set rebuild kit1 x IRC Red UHD rear big bore springs1 x Innovative-RC Dual Brake Kit1 x Big Bore shock Spring Retainers - Aluminium1 x 2x 10x15x4mm Ball Bearing Metal Shield- B0301 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long2 x Baja Big Bore Shock O-Ring Kit1 x Shock Tower Brace - Blue1 x innovative-rc Losi 5ive Diff Cup / Case1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x 3x Losi Muggy Diff Cup - Black1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x LipoBox - 4S1 x Shock Tower Brace - Black1 x IRC RX Box Set - MT41 x Engine Clutch bottom spacer Blue - 875711 x Diff/Bulkhead Housing - Rear Silver B25422 x Shock Bottom End Cap1 x 29cc Piston Rebuild Kit Set (36mm)1 x Clutch Spring - Yellow1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x Innovative-RC Big Bore Shock Socks - Blue1 x ProLux Light Weight rebuildable fuel filter - large1 x Futaba type sliding charing switch1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x 4 Bolt Cylinder Gasket1 x Baja Upper Front Arm Brace Upper Blue1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Rear Shock end Ball - 11mm1 x 1x Losi Muggy Diff Cup - Black1 x Rear Big Bore Shocks - Losi 5ive Black1 x Baja Shock Spring Retainer1 x Crank Case Engine Snap Ring1 x CY 26cc Piston ring - 34x0.7mm1 x M3x3 Grub Set screw1 x Carb & Exhaust screws - 154821 x Big Bore Shock 4 Hole Piston DUAL Rate1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Dgobone Drive Pin Set 5x24mm1 x HPI Baja Front Upper Plate 4mm Blue - 874841 x 26cc Piston Rebuild Kit Set (34mm)1 x Shock Bleed Screw - 4x2 x HPI Baja stearing servo adapter mount - Blue1 x 2x Flanged 10x6x3mm1 x Black Shock Spring Adjuster Ring1 x 6x Differential Gaskets - TT1 x CVD inner Drive set Pins 5x20mm1 x Brake plate spacer Blue - 874972 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x 2x Savage Diff Cup Case1 x HPI Baja stearing servo adapter mount1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x IRC Hing Pins Front Bottom V2 - 866341 x CY 4 Bolt Gasket set rebuild kit1 x Baja Front Upper Brace Blue - 874811 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x Baja Bush Set - BLUE1 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x Baja Shock spring retainer - Heavy Duty Springs1 x Holts Brake Cleaner1 x Piston Roller Pin Bearing1 x Big Bore Shock 2 Hole Piston1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x Black Big Bore shock Spring Retainers - Aluminium1 x Piston Pin Washer Set1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Losi 5T 5B Shock Towers V2 - Rear1 x 29cc Piston (36mm)
Reviews
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
HPI Baja Front Upper Plate 4mm Black Anodized - 87484
£22.00

<p>As always excellent quality of service!!! And great parts...