Innovative-RC HPI Baja 5B 5T enclosed chassis - Black

£120.00

Product may vary slightly from image representation.
  • Model:87477-BLK
Available Options
Live Stock Check: 0 units
Share This Product

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Preinserted rivert for under skid brace.

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Baja Big Bore Shock O-Ring Kit1 x Savage Shock Bottom End Cap1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x Rear Big Bore Shocks - Losi 5ive Red2 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x M8 Rod Ends for Big Bore Shocks2 x Clear Anodized Shock Cap2 x Losi DBXL front & rear shock end ball1 x Black Anodized Shock Cap1 x Center Tower bearing set1 x I-RC Flywheel Puller tool1 x Bearing Puller1 x Hex Key Set 8pc T-Handle Metric1 x Flux Black Anodized Standard LCG TVP Kit1 x Losi 5T 5B Shock Towers Bash - Rear BLACK1 x Smart-Fly - Pin & Flag1 x 6x Differential Gaskets2 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x Losi 5ive Hing Pins A-Arms2 x Losi 5ive Engine mount inserts - #183 x TurtleRacing Rear shock mounts2 x Baja Shock spring retainer - Heavy Duty Springs1 x O-Ring Diff Cups - 5.5x2mm1 x Crankcase engine Seal set - Viton type1 x Losi 5T 5B Shock Towers Bash - Front RED1 x 50x 3.5mm Body Clip Bulk - Rpin1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x Big Bore shock Spring Retainers - Aluminium1 x Baja Upper Front Arm Brace Upper1 x IRC Red UHD rear big bore springs1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x HPI Baja Rear Lower Brace - 874801 x Battery box bracket HPI Firestorm - Savage X1 x IRC Red UHD rear big bore springs - Losi 5T1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long3 x I-RC Baja Big Bore rear shock Spring - Stock1 x NGK Spark Plug CMR7H1 x CY 27cc Piston ring - 35x1mm4 x Shock Bleed Screw - 4x1 x CVD Pin rebuild kit - B32171 x LipoBox - 6S1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x Shock Bottom End Cap1 x Center Tower top plate for truck V1.01 x Engine Piston Stopper1 x Rear Shock end Ball - 11mm1 x Front Heavy Duty losi Shock Shaft - 8mm1 x Engine Clutch bottom spacer 6.5mm - 875711 x Losi 5T 5B Shock Towers - Front2 x Big Bore Shock 3 Hole Piston DUAL Rate2 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x Losi 5ive-T 2.0 servo single arm V2.01 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Flux Black Anodized +6mm Front LCG TVP Kit1 x Silkolene - Foam Filter Oil 1L1 x IRC Hing Pins Front Bottom V2 - 866341 x F270 4Bolt With Filter, Pullstart & Carb2 x CY 2 Bolt Gasket set rebuild kit1 x Baja Rear Lower Brace 2 - 874791 x 27cc Piston Rebuild Kit Set (35mm)1 x I-RC Baja Big Bore front shock Spring - Stock1 x IRC Hing Pin screw & washer set1 x 27cc piston (35mm)1 x IRC ESC Box - MT41 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x 29cc Piston (36mm)1 x Losi 5T 5B Shock Towers V2 - Rear1 x Shock Tower Brace - Blue2 x Piston Pin 27 & 29cc - 8x281 x LipoBox - 4S1 x M6 Rod Ends - Right hand thread1 x 2 Bolt heavy duty Cylinder Gasket1 x Big Bore Shock 2 Hole Piston DUAL Rate3 x Big Bore Shock 5 Hole Piston DUAL Rate1 x CY 26cc Piston ring - 34x0.7mm1 x HPI Baja wheel drive pin 4x281 x Flux Standard LCG TVP Kit1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x 26cc piston (34mm)1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x UHD Dgobone Drive Pin Set 1/4"x25mm2 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x Shock Tower Brace - RED1 x Losi Titanium Grade 5 King Pins B20741 x Thunder Tiger Differential Case MT4 G3 Black2 x Baja Shock Spring Retainer - Slotted1 x 10x 6mm Body Clip - Rpin1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x CY 29cc Piston ring - 36x1mm1 x HPI Baja Rear Brace RED 4mm - 874881 x Front Big Bore Shocks - Losi 5ive Red1 x Big Bore Shock Body All Colours - Losi Front1 x M3x5 Button Head Socket cap screws - bag 101 x Losi 5ive Spring Adjuster Ring1 x Losi 5ive Front and rear shock end ball1 x HPI Baja Rear Brace 4mm - 874881 x IRC Front MID Front big bore springs - Losi 5T2 x Ofna 250cc Fuel Tank Mounts1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x Rear Big Bore Shocks - Losi 5ive Silver1 x IRC Red UHD Front big bore springs1 x Big Bore Shock 4 Hole Piston1 x Front Big Bore Shocks - Losi 5ive Black1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED2 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x IRC Hing Pins Rear Top V2 - 866351 x HPI Savage Screw kit (all models) - High tensile1 x Air Filter Gasket1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x Full X upgrade Kit1 x Front Big Bore Shocks - Losi 5ive Silver1 x Rear Big Bore Shocks - Losi 5ive Black1 x M4 Washer Zinc plated bag 201 x Savage Big Bore shock Socks - Black1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x HPI Baja Brake Calliper - Black Anodized1 x HPI Baja stearing servo adapter mount - Black1 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x losi 5ive diff inserts1 x Innovative-RC HPI Baja under chassis brace V2 - Black
Reviews
3x Thunder Tiger Differential Case MT4 G3 Silver
3x Thunder Tiger Differential Case MT4 G3 Silver
£25.00

<p>These parts are superb, awesome workmanship and a great p...