Innovative-RC HPI Baja 5B 5T enclosed chassis

£120.00

Product may vary slightly from image representation.
  • Model:87477
Available Options
Live Stock Check: 1 units
Share This Product

 

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Pre installed inserts for chassis brace
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts

 

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

 

 

I bought a silver one recently off Rob having seen them on various test cars at the MMR weekend, and because I bent my stock chassis on the last day. Its a very nice looking chassis, and its almost shamefuil it will be scratched to buggery within a few weeks, but hey ho thats what they're for. I like the fact the side rails are not cut out, to help minimise the grass and bits getting in. I also like the blanking plate for the the power switch, so if you move the switch you can blank that bit off as well. Its well thought out, with mysterious holes pre drilled for up and coming optional extras and its very well made. Mine went back together like a dream, although with my alloy GH front shock supports, the fit was tight but correct. Stock chassis or one of these ? its a no brainer really Hosster

Rated by Shaun Howe

What can i say, awesome!!! so much stronger than stock and being enclosed keeps the mess out of the insides, cant rate highly enough, fantastic product at a great price, every baja should have 1 for a bashers video review check out the S.C.B gallery thread on www.baja-forum.co.uk,

Rated by Alan Parker

Bought this amazing chassis, extremely please with it as it looks great and feels solid. Well done innovative great bit of craftsmanship. Just wondering your considering making a quick diff transmission case? Next on the list big bore shocks, I be back innovative. Thanks for the great service

Rated by Zach Kassapi

Hello j'ai demandé a rob ce chassis pour un ami qui n'était plus en stock ma demande a était traité tellement vite que le lendemain ce même chassis etait de nouveau en stock mais en peu d'exemplaires donc je pense que c'était en réponse a ma demande et rien que pour sa irc et toute l'équipe restera vraiment mon fabriquant que j'estime de plus en plus n'importe quelle demande est traité et exécuté le plus rapidement possible je demande toujours des petits plus dans mes commandes et a chaque fois c'est positif contrairement a certains autre ou tout est tout le temps il est beaucoup plus difficile de demander des petits bonus ou autres et pour parler de la qualité et des prix de vos produits c'est encore pareil que du positif j'espère vraiment que vous continuerai a nous sortir et vendre des produits qu'on ne trouve pas ailleurs ou alors beaucoup plus cher,sa ne fait que 6mois que je suis dans le 1/5ème mais honnêtement depuis que j'ai vu les produits irc a l'oeuvre j'ai tout de suite accroché donc voila si vous cherchez quelque chose de fiable et beau a prix plus que raisonnable vous êtes au bon endroit,ne vous arretez pas au produit qui ne sont pas en stock vu que sur simple demande le produit peut être réalisé ou etre mis a jour tres rapidement enfin bon voila continuez comme sa vous êtes au top merci.

Rated by Bastian Drut
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x CVD inner Drive set Pins 5x20mm1 x HPI Baja Screw Kit (all models) - High tensile1 x losi 5ive diff inserts1 x Flywheel Nut2 x 6x Differential Gaskets2 x Baja Shock spring retainer - Heavy Duty Springs1 x Maxima Air Filter Cleaner - Spray1 x 1x Losi 8ight-T Diff Cup - Black1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x Front Big Bore Shocks - Losi 5ive Red1 x M6 Rod Ends - Right hand thread1 x 29cc Piston (36mm)2 x CVD Drive set Pins 4x20mm B65601 x Front Big Bore Shocks - Losi 5ive Black1 x 5x10x0.3 Steel Shim - Pack 102 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x Innovative-RC Big Bore Shock Socks - Blue1 x Baja Upper Front Arm Brace Upper Blue1 x LCG TVPs, Exstended 1inch back with 6mm Front2 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32165 x Baja Front Upper Brace Blue - 874811 x Innovative-RC Muggy Chassis - Black1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x HPI Baja Rear Brace 4mm Blue Anodized - 874882 x 3x Losi Muggy Diff Cup - Black1 x Blue Big Bore shock Spring Retainers - Aluminium1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty2 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch1 x IRC Hing Pin screw & washer set1 x M3 Captive Nuts / T Nuts - Bag101 x Steering Crank shaft1 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x ProLux Light Weight rebuildable fuel filter - large1 x Brake pad screws - IRC Center Tower to stock Pads2 x 2x 12x24x6mm Ceramic Ball Bearing Rubber Shield- B0891 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x M3x8 Socket head cap screws - bag 101 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x Clear Anodized Shock Cap - Silver2 x innovative-rc Losi 5ive Diff Cup / Case1 x LCG (Low Center of Gravity) TVPs - 4mm Thick2 x Losi 5ive-T 2.0 servo single arm V2.01 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x Shock Tower Brace - Silver1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x Out Drive Cup Pins - Bag 61 x Piston Pin Washer Set1 x ProLux Stone Fuel Filter - Blue1 x X Upgrade Kit2 x IRC Hing Pins Front Top V2 - 866331 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x SuperSwitchHD 2 Pac1 x M4x30 Socket head cap screws - bag 101 x SuperSwitchHD - 1x2 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x Outdrive cup shaft Orings2 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x CY Clutch case Housing2 x Shock Cap O-Ring Spacers1 x Center Tower to Clutch suport brace V2.01 x NGK Spark Plug CMR7H1 x Innovative-RC Dual Brake Kit2 x Blue Anodized Shock Cap1 x M6 Captive Nuts / T Nuts - Bag101 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x DBXL Top shock cap Bush 5mm1 x Innovative-RC Foam Filter Oil - 100ml1 x M3x25mm Socket Cap Screw - BAG 101 x Losi 5ive Spring Retainers3 x O-Ring Diff Cups - 9.5mmx2.5mm1 x 3x6x0.3 Steel Shim - Pack 102 x ProLux Stone Fuel Filter - RED1 x Losi Titanium Grade 5 King Pins B20741 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x 2x 17x30x7mm Ball Bearing Rubber Shield- B0921 x Roll Bar for HPI Savage 3mm1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Big Bore Shock Body All Colours - Losi Front1 x Ultra Heavy Duty Front Center Dogbone - 78mm2 x PROLUX FILTERED FUEL PICK UP CLUNK1 x CY 26cc Piston ring - 34x0.7mm1 x Big Bore shock Spanner1 x Silkolene - Foam Filter Oil 1L1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Baja Diff bush - B0802 x 2x Losi LST1 & LST2 Diff Cup- silver1 x I-RC Losi Big Bore rear shock Spring - 44lb2 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x insulator gasket1 x M4x30 Countersunk Socket head cap screws - bag 101 x Baja Rear Lower Brace 2 Blue - 874792 x ProLux Stone Fuel Filter - Grey1 x 4mm Standard LCG TVPs Package - 4mm1 x HPI Savage Screw kit (all models) - High tensile1 x IRC Front MID Front big bore springs - Losi 5T1 x Rear Big Bore Shocks - Losi 5ive Blue1 x I-RC Baja Big Bore rear shock Spring - Stock1 x Clutch Shoe Holder Mount1 x CY Engine FlyWheel (Rotor)2 x M5 Hank rivet bush - Bag101 x IRC BLACK MID rear big bore springs - Losi 5T1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Innovative-RC Hoodie - Size Large1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x M6 Rod Ends & Steering ball set1 x Shock Bottom End Cap1 x IRC Hing Pins Rear Bottom V2 - 866351 x 2x Savage Diff Cup Case1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x Center Tower throttle supports1 x Shock Bleed Screw - 4x1 x O-Ring Diff Cups - 5.5x2mm1 x HPI Baja Brake Calliper - Blue Anodized1 x Losi 5ive Engine mount inserts - #191 x 2x Losi LST1 & LST2 Diff Cup - Black1 x Losi 5ive Front and rear shock end ball1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Big Bore Shock 3 Hole Piston DUAL Rate1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0942 x Baja Bush Set - BLUE1 x Black Shock Spring Adjuster Ring1 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x V2 Plated Savage + MCD V4 Heavy Duty Baja Shock Shaft - 8mm1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x Baja Diff gear Drive pin - 965011 x Titanium Exhaust Wrap1 x I-RC Rear Baja Big Bore shock Spring - Progressive2 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x IRC Red UHD Front big bore springs1 x M5 Captive Nuts / T Nuts - Bag101 x Big Bore shock Spring Retainers - Aluminium1 x M6 Rod Ends - Left hand thread1 x M6 Rod Ends & camber + steering ball set1 x Holts Brake Cleaner1 x HPI BAja Left Side Engine Mount Brace - 874891 x NGK Spark Plug CMR7H - Box101 x Baja Big Bore Shock O-Ring Kit1 x Innovative-RC Muggy radio tray set - Black1 x M4 Washer Zinc plated bag 201 x M3x12 Countersunk Socket head cap screws - bag 101 x 1x Losi LST1 & LST2 Diff Cup - Black1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x M8 Rod Ends for Big Bore Shocks1 x M3x3 Grub Set screw1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x HPI Baja Rear Lower Brace - 874801 x Diff/Bulkhead Housing - Front Silver1 x Shock Tower Brace - Black1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x Rear Big Bore Shocks - Losi 5ive Silver
Reviews
Extended 6mm Front LCG TVPs Package & dog bone - 4mm
Extended 6mm Front LCG TVPs Package & dog bone - 4mm
£60.00

Have just received and fitted this kit and have to say it lo...