F270 4Bolt W/+2 Stuffed Crank

$249.60

Product may vary slightly from image representation.
  • Model:F271001000
Available Options
Live Stock Check: 0 units
Share This Product

This Chung Yank (CY) F270 is pre fitted with a +2 Stuffed Crank making this engine have 29cc of volume.

NOTE: We can remove, Clutch, Clutch Housing, Air Filter, exhaust, carb etc to reduce cost for thoes that want to use there exisiting setups.

Chung Yang F270 engine (34mm bore, 30mm stroke - 27.2cc) with Walbro WT-668 carb. Includes 54mm inner clutch assembly pre-installed. Ready to bolt-on. Approx 3.25+ horsepower. Similar design to the Zenoah G240RC/G270RC - 4 transfer port hp cylinder, single ring piston, double sided finned flywheel, and hp exhaust canister. Engine requires 91 octane or higher fuel, mixed 25:1 with 2-cycle oil.


Comes as pictured, with plastic/foam air filter, and HP exhaust canister.

For R/C: Fits a wide variety of R/C cars, planes, boats, and helicopters. Same mounting dimensions as Zenoah G230RC / G260RC. For cars - fits FG: Marder, Leopard, Monster Beetle, Monster Truck, Stadium Truck, Pajero, etc. Also fits Duratrax Firehammer, XTM, Carson Attack, HPI Baja 5b, Traxxas Monster Buggy, and most other large scale onroad and offroad RC cars.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x CY 4 Bolt Gasket set rebuild kit1 x Piston Pin Washer Set1 x Shock Bleed Screw - 4x1 x CY 26cc Piston ring - 34x1mm2 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long2 x Baja Shock Top Mounts - Rear1 x Baja Diff o-rings - bag102 x Innovative-RC Big Bore Shock Socks - Black1 x Losi 5ive Spring Retainers1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x G270RC Petrol RC Engine - 2 Stroke1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x Baja Rear Lower Brace 2 Blue - 874792 x IRC Hing Pins Rear Top V2 - 866351 x Short Big Bore Rod Ends - M81 x M3 Nylock nut bag of 202 x M4x4 Grub Screws2 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x M8x25 Socket head cap screws - bag 61 x FILTERED FUEL PICK UP CLUNK1 x CY Insulator manifold1 x 29cc Piston Rebuild Kit Set (36mm)2 x Carb & Exhaust screws - 154822 x IRC Hing Pins Front Top V2 - 866331 x CY +1mm Stroker Crank set1 x M5 Hank rivet bush - Bag101 x insulator gasket1 x M2.5 Nylock Nuts - Bag 101 x M5x5 Grub Set Screw1 x Baja Rear Lower Brace 2 - 874792 x M3x16 Socket head cap screws - bag 101 x M4x4 Grub/Set Screw1 x M2.5x12 Stainles Socket Cap Screw - Bag 101 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x Baja Diff Cup side screws1 x 2 Bolt heavy duty Cylinder Gasket1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Crankcase engine Seal set - Nitrile type2 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x Losi 5ive top shock mounts1 x CY +2mm Stuffer Stroked Crank set2 x Flywheel Key1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x High response clutch set - Red Spring1 x M4 Nylock nut bag of 201 x Shock Bottom End Cap2 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x CY 23cc Piston Ring - 32x1mm1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x Innovative-RC Muggy radio tray set1 x 6x Differential Gaskets1 x Innovative-RC Hoodie - Size Large1 x Baja Shock Spring Retainer - Slotted1 x 29cc Piston (36mm)1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x M5 Captive Nuts / T Nuts - Bag101 x Carburetor Gasket1 x M6 Hank rivet bush - Bag101 x M3x16 Countersunk Socket head cap screws - bag 102 x 2x Savage Diff Cup Case1 x G290RC Petrol RC Engine - 2 Stroke1 x Crankcase engine Seal set - Viton type1 x M4x12 Socket head cap screws - bag 101 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x Big Bore Shock 5 Hole Piston1 x HPI MT2 Diff Cup Case Silver - 1x1 x M3 washers - Zinc plated bag 201 x M3 Spring Washer Zinc plated - bag 201 x SuperSwitchHD - 1x1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x Nitro Engine Piston Stopper1 x IRC Hing Pins Rear Bottom V2 - 866351 x HPI Baja Brake Calliper - Blue Anodized1 x HPI Baja Rear Lower Brace Blue - 874801 x Flywheel Nut1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x M3 Captive Nuts / T Nuts - Bag101 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x Crank Case Engine Snap Ring1 x Baja Big Bore Shock O-Ring Kit1 x CY 27cc Piston ring - 35x1mm1 x M3x10 Button Head Socket cap screws - bag 101 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x M8 Rod Ends for Big Bore Shocks1 x Clutch Shoe Holder Mount1 x Black Big Bore shock Spring Retainers - Aluminium1 x 27cc (35mm) Cylinder Head 2 Bolt
Reviews
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon
$87.36

Brought this to convert my original savage XL to a low centr...