Diff/Bulkhead Housing - Rear Silver B2542

197.69€

Product may vary slightly from image representation.
  • Model:LOSB2542
Live Stock Check: 0 units
Share This Product

Rear Losi 5ive-T & losi 5ive-B,  Losi 5ive-mini Diff Bulkhead Housing , Replace stock losi 5ive part B2542.

This rear bulkhead has a quick easy access to the pinion gear from the side of the bulkhead, and can be changed while still fully mounted to the vehicle in the event of having to change a bearing or pinion gear gives fast,quick and easy access with minimum down time.

Shims are also included with this bulkhead to re shim the pinion gear forward or back to fully mesh with the crown gear on the diff. also included are shims for use on the diff crown gear to get best fitment and life from the pion and crown gears. (we find a 0.8-1.0mm shim is needed on pinion on outside of the housing. and 0.5-0.8mm shim is needed on the crown bearings to get the best fitment, but please note this will vary from each gear set and will require trial and error for best fitments)

Please note, oversized larger bearings than standard are used through out on the diff and pinion gear. this does require modding of the a-arm brace if using after-market or stock due to larger bearings in use on the pinion. a small amount of material is needed to be removed. Innovative-RC arm braces fit with no mods.

only one diff insert is used in this bulkhead for carrying the diff cup. the non-crown gear side is a fixed bearing carryer machined in groove, while the pinion/crown side has been changed to a coustom made steel insert, that is suported by the diff hosing axial and longitudinal giving better suport under load giving a better gear life when using larger CC engines and the like.


Machined from billet 7075-T6 aluminium on full 5axis machine ,Incorporating larger bearings on the diff & input shaft. 9x24x7mm bearings on input shaft from CVD, 15x28x7mm bearings on diff cup (all bearings included with item).

Fully Compatible with stock out Drive cups and other makes. works with Stock towers & other shock tower makes.
100% Made in the UK

Includes
1x Rear bulkhead
1x Rear diff insert to bulkhead
1x full set of shims to re shim pinion gear & diff.
1x Screw Hardware to assemble with, all BZP Steel Screws for long life
1x Anti-Roll Bar Brace
1x Bearings Full Set - 2x - 15x28x7mm ,2x - 9x27x7mm,

Required:
no other parts, just Fitting.

Note:
We recommend dry fitting the diff into the hosing and checking gear mesh and re shimming if needed.

Life Time Warranty

 

<p>Hi, I&#39;m leaving this review as I had purchased a chinese so called CNC billet alloy diff/bulkhead for the 5ive t and I had problems with it out the Box. It was not billet alloy was Cast Alloy that had been shaped with a CNC machine to finish. After the work it took me to make it fit correctly it then kept destroying pinion shaft bearings (Ceramic ones aswell). So I did a bit of reasearch and found that Innovative RC made one in the U.K, I imediatley bought one of the rear Diff/Bulkheads from them. The size is Exact and the Fit and Finish is The Best I Have Seen they are machined from a solid bar of T-6 Hardened Billet. These bulkheads are actually made inhouse by Innovative RC themselves. I HOPE that everyone that reads my Review will realise that the engineers at Innovative ONLY make the BEST Quality Upgrades. I Hope this review helps you to make up your mind on your purchase. Thanks for Reading GaryGadget.</p>

Rated by Gary Taylor
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 3x Losi Muggy Diff Cup - Silver1 x Baja Shock Top Mounts - Front2 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x 4mm Standard LCG TVPs Package - 4mm3 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec2 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Shock Tower Brace - Blue1 x V3 Front Big Bore Shocks - Baja 5B 5T2 x 4x Complete Innovative Black Anodized Savage Shocks1 x CEN RX & Battery Box1 x HPI Baja stearing servo adapter mount - Blue1 x Losi 5ive Hing Pins A-Arms1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x Savage Shock Bottom End Cap1 x Losi 5ive Spring Retainers1 x HPI Baja wheel drive pin 4x281 x DBXL Top shock cap Bush 5mm1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x 1x Losi Muggy Diff Cup - Silver3 x Front Heavy Duty losi Shock Shaft - 8mm2 x Big Bore shock Spanner2 x M6 Rod Ends - Right hand thread1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x IRC Black HD Rear Big Bore Springs1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Diff/Bulkhead Housing Bearings - 15x28x7mm2 x Big Bore Shock 4 Hole Piston DUAL Rate1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0942 x 6x Differential Gaskets - TT1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32122 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver2 x Losi 5ive drive cup Clips2 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")2 x M3x5 Button Head Socket cap screws - bag 102 x CVD inner Drive set Pins 5x20mm1 x Diff/Bulkhead Housing - Front Silver1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x CY Replacement Crank Case Gasket1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x Innovative-RC Muggy radio tray set - Black2 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32243 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x Losi 5ive Engine mount inserts - #191 x M4x30 Socket head cap screws - bag 101 x HPI Baja Rear Lower Brace Blue - 874802 x Brake pad screws - IRC Center Tower to stock Pads1 x CVD Drive set Pins 4x20mm B65601 x 2x Losi LST1 & LST2 Diff Cup - Black1 x SuperSwitchHD - 1x1 x Innovative-RC Muggy Chassis - Silver1 x IRC ESC Box - MT42 x IRC RX Box Set - MT41 x IRC Hing Pins Full Set V2 - 10Pins1 x Losi 5T 5B Shock Towers V2 - Rear1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x M4x4 Grub Screws1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x LipoBox - 4S2 x SuperSwitchHD 2 Pac1 x Black Anodized Shock Cap1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Thunder Tiger Differential Case MT4 G3 Black2 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon2 x Battery box bracket HPI Firestorm - Savage X1 x Innovative-RC T-Shirt - Size Medium1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x Hex Key Set 8pc T-Handle Metric1 x CY 4 Bolt Gasket set rebuild kit1 x IRC Big Bore upgrade set V1 to V2 HPI Savage3 x Flux Standard LCG TVP Kit1 x HPI Baja Brake Calliper - Black Anodized1 x 2 Bolt heavy duty Cylinder Gasket1 x Short Big Bore Rod Ends - M81 x Engine Clutch bottom spacer RED - 875711 x 5x 2.5x14mm CVD Dowel Pins1 x Innovative-RC Dual Brake Kit3 x Flux Black Anodized Standard LCG TVP Kit1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x Baja Shock Spring Retainer - LST1 x HPI Baja wheel drive pin 5x24- 965041 x Battery box bracket HPI Rush box1 x LCG TVPs, Exstended 1inch back with 6mm Front1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x Front - Antiroll Bar brace1 x Front Big Bore Shocks - Losi 5ive Blue1 x Clear Anodized Shock Cap - Silver1 x Blue Big Bore shock Spring Retainers - Aluminium1 x Engine Clutch bottom spacer 6.5mm - 875711 x Flux Black Anodized +6mm Front LCG TVP Kit1 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x Black Anodized Roll Bar1 x Black Big Bore shock Spring Retainers - Aluminium1 x CRT Tower Set - Silver1 x Innovative-RC Big Bore Shock Socks - Blue1 x Brake pad screws - M5 to IRC pads1 x CRT Chassis Gaskets1 x Carburetor Set WT6681 x Dgobone Drive Pin Set 5x24mm
Reviews
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
52.33€

love these shafts they look and feel so sturdy have had no t...