Flux Standard LCG TVP Kit

£45.00

Product may vary slightly from image representation.
  • Model:Flux-STDkit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - based on standard HPI Flux Length TVPs but 4mm Thick.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: Standard Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
Based on standard flux tvp length so no body shell changes needed a direct 100% replacement
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):260grams
Skid Plate & Braces: 90 grams

.:Included:.
2x TVPs (Left & Right)
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

had these a while now and have done some proper hard bashing and everything on my savage has broke twisted or bent but these are like new very strong easy to fit. i liked them so much i went for the xl upgrade and added 23mm wheels and just as solid very good upgrade dont read about them buy em and see for yourself

Rated by darren mccarthy
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x CEN RX & Battery Box2 x IRC Hing Pins Full Set V2 - 10Pins1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x Rear Big Bore Shocks - Losi 5ive Silver1 x Baja Bush Set1 x Baja Shock Top Mounts - Rear2 x Black Slotted Big Bore shock Spring Retainers - Aluminium3 x Big Bore shock Spanner2 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x M5 Hank rivet bush - Bag101 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32242 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x M6 Rod Ends & camber + steering ball set1 x Baja Big Bore Shock O-Ring Kit1 x CVD Drive set Pins 4x20mm B65601 x HPI Baja Front Upper Plate 4mm RED - 874841 x I-RC Losi Big Bore rear shock Spring - 66lb4 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x CVD Pin rebuild kit - B32171 x 5x 2.5x14mm CVD Dowel Pins3 x Wheel Spacer Adapters - GRP & MCD Wheels1 x M3 washers - Zinc plated bag 201 x Baja Bush Set - BLUE1 x Losi 5ive Engine mount inserts - #192 x Big Bore Shock Body All Colours - Losi Front1 x Brake plate spacer RED - 874971 x CY 2 Bolt Gasket set rebuild kit1 x Big Bore Shock 3 Hole Piston1 x M6 Rod Ends - Right hand thread1 x Losi 5ive Front and rear shock end ball1 x O-Ring Diff Cups - 5.5x2mm1 x Big Bore Shock 2 Hole Piston1 x Ultra Heavy Duty Front Center Dogbone - 78mm2 x CY Engine FlyWheel (Rotor)1 x 50x 6mm Body Clip Bulk - Rpin1 x HPI Baja Brake Calliper - Black Anodized2 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x M3x10 Socket head cap screws - bag 101 x ProLux Stone Fuel Filter - Grey1 x IRC Hing Pins Front Bottom V2 - 866341 x Nitro Engine Piston Stopper2 x M4x30 Socket head cap screws - bag 101 x I-RC Losi Big Bore rear shock Spring - 44lb3 x Shock Bottom End Cap2 x Engine Clutch bottom spacer stock - 875711 x Losi 5ive Spring Retainers3 x Shock Cap O-Ring Spacers1 x Diff/Bulkhead Housing Bearings - 15x28x7mm2 x IRC Black HD Rear Big Bore Springs3 x IRC Red UHD rear big bore springs2 x HPI Savage Screw kit (all models) - High tensile3 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x I-RC Baja Big Bore front shock Spring - Stock1 x Big Bore shock Spring Retainers - Aluminium1 x Baja Front lower arm brace Red - 874811 x Engine / Cylinder Cover 4 Bolt1 x Baja Upper Front Arm Brace Upper Blue4 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x HPI BAja Left Side Engine Mount Brace - 874891 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x HoBao / Ofna 1/7th Fuel tank - 250cc3 x HPI Baja Brake Calliper - Blue Anodized1 x IRC Red UHD Front big bore springs - Losi 5T2 x Shock Bleed Screw - 4x2 x Hex Key Set 8pc T-Handle Metric1 x Brake plate spacer Blue - 874971 x Outdrive cup shaft Orings1 x CY 26cc Piston ring - 34x0.7mm1 x Rear Chassis Plate 7075-T6 V3 RED - 874821 x HPI Baja Right Side Engine Mount Brace RED - 874901 x Baja Bush Set - Red1 x 2 Bolt heavy duty Cylinder Gasket1 x HPI Baja Rear Brace 4mm - 874881 x CY Pull Start Assembly - Metal grab1 x Big Bore Shock 5 Hole Piston1 x Baja front Shock end Ball1 x Baja Diff o-rings - bag101 x Losi DBXL front & rear shock end ball1 x Baja Shock Top Mounts - Front1 x M3x8 Socket head cap screws - bag 101 x IRC Front MID Front big bore springs - Losi 5T1 x Clear Anodized Shock Cap1 x I-RC stearing Linkages1 x Bearing Puller1 x IRC Red UHD Front big bore springs1 x Air Filter Gasket1 x Engine Clutch bottom spacer RED - 875711 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x Black Anodized Shock Cap1 x IRC BLACK MID rear big bore springs - Losi 5T2 x Rear Heavy Duty losi Shock Shaft - 8mm1 x Front Axel - Thunder Tiger MT4 CVD Universal1 x Black Anodized Standard LCG TVP Kit1 x Black Adjuster Ring1 x 29cc Piston (36mm)1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874901 x TurtleRacing Rear shock mounts1 x 2x 15x24x5mm Flanged Ball Bearing Metal Shield
Reviews
Flux Standard LCG TVP Kit
Flux Standard LCG TVP Kit
£45.00

had these a while now and have done some proper hard bashing...