Flux Standard LCG TVP Kit

£45.00

Product may vary slightly from image representation.
  • Model:Flux-STDkit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - based on standard HPI Flux Length TVPs but 4mm Thick.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: Standard Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
Based on standard flux tvp length so no body shell changes needed a direct 100% replacement
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):260grams
Skid Plate & Braces: 90 grams

.:Included:.
2x TVPs (Left & Right)
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

had these a while now and have done some proper hard bashing and everything on my savage has broke twisted or bent but these are like new very strong easy to fit. i liked them so much i went for the xl upgrade and added 23mm wheels and just as solid very good upgrade dont read about them buy em and see for yourself

Rated by darren mccarthy
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x CY Flywheel / Fan Cover2 x 5x 2.5x14mm CVD Dowel Pins2 x 10x16x0.1 Steel Shim - Pack 102 x M6 Rod Ends & camber + steering ball set1 x 2 Bolt heavy duty Cylinder Gasket1 x 26cc (34mm) Cylinder Head - 4 Bolt2 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x M6 Rod Ends - Left hand thread1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x Clutch Shoe Holder Mount1 x M6 Rod Ends - Right hand thread1 x 10x16x0.5 Steel Shim - Pack 101 x M3 Nylock nut bag of 201 x 10x16x0.3 Steel Shim - Pack 102 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x Innovative-RC Foam Filter Oil - 100ml1 x Carb & Exhaust screws - 154821 x Losi 5ive drive cup Clips1 x 26cc Piston Rebuild Kit Set (34mm)1 x Piston Snap Ring Set1 x M2 Captive Nuts / T Nuts - Bag 101 x Rear Big Bore Shocks - Losi 5ive Black1 x M3x16 Countersunk Socket head cap screws - bag 102 x Carburetor Gasket1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x 27cc (35mm) Cylinder Head 4 Bolt1 x Crankcase engine Seal set - Viton type1 x CY Clutch case Housing1 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x M3x10 Countersunk Socket head cap screws - bag 101 x Baja Rear Lower Brace 2 Blue - 874791 x Crank Case Sealed bearing 12x28x8- 60012RS1 x Clear Anodized Shock Cap1 x Baja Diff o-rings - bag101 x O-Ring Diff Cups - 5.5x2mm1 x FILTERED FUEL PICK UP CLUNK1 x IRC Red UHD rear big bore springs1 x CY Exhaust Gasket1 x M3x10 Socket head cap screws - bag 101 x Piston Roller Pin Bearing1 x 27cc Piston Rebuild Kit Set (35mm)1 x M3x16 Socket head cap screws - bag 101 x 27cc (35mm) Cylinder Head 2 Bolt1 x M4x4 Grub Screws1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x Rear Big Bore Shocks - Losi 5ive Silver1 x Baja Upper Front Arm Brace Upper Blue
Reviews
Innovative-RC HPI Baja 5B 5T enclosed chassis
Innovative-RC HPI Baja 5B 5T enclosed chassis
£120.00

Hello j'ai demandé a rob ce chassis pour un ami qui n'était ...