UHD Innovative-RC BAJA dogbone set (cups & shafts) 121mm - 5mm

£120.00

Product may vary slightly from image representation.
  • Model:104966-fullS
Live Stock Check: 8 units
Share This Product
NEW V2025, upgraded design using 1/4" pins, fully enclosed drive cup design , made for big CC in mind.

Standard Length shaft set-5mm out drive axel pin size

UHD Innovative-RC dog bone Set for HPI baja, Standard Length

Please note, this set has a 5mm drive pin on the out drive for the axel and no the standard 4mm pin size!

120/121mm Pin Center Length shafts (aprox 132mm Over all length) shafts which includes Drive cups (inner & outer) shafts having an 18mm ball size giving these a very strong ball area fot running the new 1/4" pin size , while still mainting a good weight to strength ratio, middle section has been increased to 12mm also while using a high grade tensile steel for much more core added strength and durability, more so when it comes to running larger engine sizes (46cc +). these new UHD versions have been made with the large CC engines in mind for standard car models (baja RTR,SS etc), hybrids and the likes etc.

All steels are made from British grade high tensile EU sourced and coustom heat treated for a final product.

Drive cups
Made to the same out side sizes as the HPI baja 5SC cups so any drive boot designed to work with 5SC cups will fully work with these cups still.

Shafts & cups are made from British grade high tensile heat treated steels. now also having a fully hardend 1/4" pin (6.5mm) for the drive line over the old 5mm version, giving more added contact surface with out sacrificing strength in the cup or dog bone design.
Hardend and ground drive pins with grub screw slots so screws having a grip location helps aid in stopping pins falling out..
Sold as a set of 2x dog bones & cups.(completes 1 car)

  • Can be a driect replacment for standard part hpi 86610 & Rovan B29-1245

Dimentions quoted are for reff use only.

Included:
2x UHD Innovative-RC Dog Bones
4x 1/4"x1" drive pins
4x M4 Grub Screws
2x out drive cups
2x 5x24 H&G Pins
2x M4x10 Socket cap screw
2x out drive cups
2x 5x24 H&G Pins
2x M4x10 Socket cap screw

Lifetime warranty against breaking

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x M4 Nylock nut bag of 201 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x Black Anodized Standard LCG TVP Kit1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x HPI Baja wheel drive pin 5x24- 965041 x Black Shock Spring Adjuster Ring1 x M5x5 Grub Set Screw1 x 1x Savage Diff Cup Case1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x insulator gasket1 x M6 Rod Ends & camber + steering ball set1 x Innovative-RC HPI Baja under chassis brace V2 - Blue1 x CY 4 Bolt Gasket set rebuild kit1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Innovative-RC Muggy Chassis - Black1 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x Losi 5ive Diff Gaskets - 6x1 x 4-40x3/8 Button Head socket Screw - Bag 101 x IRC Hing Pin screw & washer set1 x M6 Rod Ends - Right hand thread1 x 2x Savage Diff Cup Case1 x Left Spacer - 875711 x IRC Hing Pins Front Top V2 - 866331 x Baja Diff o-rings - bag101 x Big Bore shock Spanner1 x O-Ring Diff Cups - 5.5x2mm1 x 10x16x0.3 Steel Shim - Pack 101 x 3x Losi Muggy Diff Cup - Silver1 x Shock O-Ring Kit1 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x Baja Rear Lower Brace 2 Blue - 874791 x IRC Red UHD Front big bore springs1 x Shock Cap O-Ring Spacers1 x Shock Bottom End Cap1 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Shock Tower Brace - Silver1 x 6x Differential Gaskets1 x 1x Losi Muggy Diff Cup - Silver1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x 3x Losi Muggy Diff Cup - Black1 x Brake pad screws - IRC Center Tower to stock Pads1 x Big Bore Shock 3 Hole Piston1 x Losi 5ive top shock mounts1 x Rear Big Bore Shocks - Losi 5ive Silver1 x Baja Big Bore Shock O-Ring Kit1 x Black Big Bore shock Spring Retainers - Aluminium1 x Shock Bleed Screw - 4x1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x I-RC Losi Big Bore rear shock Spring - 44lb1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x IRC Red UHD rear big bore springs - Losi 5T1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x 5x 2.5x14mm CVD Dowel Pins1 x Silkolene - Foam Filter Oil 1L1 x Clutch Shoe Holder Mount1 x Innovative-RC Muggy Chassis - Silver1 x Diff/Bulkhead Housing - Rear Silver B25421 x Pull Start Thumb Screws1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x Rear Big Bore Shocks - Losi 5ive Black1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x Carburetor Set WT6681 x Flywheel Nut1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x HPI BAja Left Side Engine Mount Brace - 874891 x Innovative-RC Dual Brake Kit1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x IRC Hing Pins Full Set V2 - 10Pins1 x NGK Spark Plug CMR7H1 x Diff/Bulkhead Housing - Front Silver1 x Savage Rod End 10mm Balls1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x HPI Baja Brake Calliper - Black Anodized1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black
Reviews
Rear Chassis Plate 7075-T6 V3 - 87482 - Black
Rear Chassis Plate 7075-T6 V3 - 87482 - Black
£55.00

really nice well made chassis plate , looks nice with all my...