Cart Contents (282) Checkout My Account

Innovative-RC HPI Baja enclosed chassis - SHORT BLUE

£120.00

Innovative-RC HPI Baja enclosed chassis - SHORT BLUE
Product may vary slightly from image representation.
  • Model:87477-short
Available Options
Live Stock Check: 1 units
Share This Product

This Innovative-RC Baja SHORT Chassis

This Innovative-RC Baja Chassis has been custom made to build a short wheel base Baja, fits the HPI Baja 5B ,5SC & 5T. Made from high quality aluminium and available in 4 different colours (Silver/Clear anodized, Black, RED & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike giving a fully enclosed chassis.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled with inserts inserted for a front kick strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version) and Uber RC bumpers.

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.

this chassis is 1.75" (44.45mm) shorter than a stock chassis and made to take a full stock fuel tank witha coustom RX box. (note rx box not included). all other braces mount as normal.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets outside to keep weight down & maintaining strength
  • 680Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate included
  • 1.75" (44.45mm) shortened chassis
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Preinserted rivert for under skid & top brace.

 

Option Extra

Innovative-RC HPI Baja under chassis brace

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...

You might also like...

Baja Differential cup / case set - Silver
Baja Differential cup / case set - Silver
£80.00
View
M4x4 Grub Screws
M4x4 Grub Screws
£1.50
View
IRC Hing Pins Full Set V2 - 10Pins
IRC Hing Pins Full Set V2 - 10Pins
£35.00
View
Baja Shock Top Mounts - Rear
Baja Shock Top Mounts - Rear
£10.00
View
Categories
Cars & TrucksAircraft & partsScrews & FixingsO-Rings & SealsClothing & Merchandise
Manufacturers
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
What's New?
Rear Heavy Duty losi Shock Shaft - 8mm
Rear Heavy Duty losi Shock Shaft - 8mm
£12.00
Share This Product
Shopping Cart
2 x Maxima Air Filter Cleaner - Spray1 x I-RC Losi Big Bore front shock Spring - 26.5lb1 x CY Engine FlyWheel (Rotor)2 x M4x16 Socket head cap screws - bag 101 x IRC Red UHD rear big bore springs1 x Mugen Fuel Tank - 150cc1 x Battery box bracket HPI Firestorm - Savage X1 x DBXL Top shock cap Bush 5mm1 x IRC Hing Pins Front Bottom V2 - 866341 x Front Big Bore Shocks - Losi 5ive Red1 x I-RC Losi Big Bore front shock Spring - 44lb4 x insulator gasket2 x Engine Clutch bottom spacer stock - 875711 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK2 x Rear Big Bore Shocks - Losi 5ive Silver1 x Baja Upper Front Arm Brace Upper Blue2 x Innovative-RC Dual Brake Kit2 x HPI Baja Rear Brace 4mm - 874881 x Engine Plate for LCG TVPs Savage X & LCG TVPs3 x Dgobone Drive Pin Set 5x24mm1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK4 x Shock Cap O-Ring Spacers3 x 2 Bolt heavy duty Cylinder Gasket4 x 2x Crankcase Engine Bearing - 12x28x8 6001-C32 x HPI Baja Rear Brace 4mm Black Anodized - 874882 x IRC Big Bore upgrade set V1 to V2 HPI Savage1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x HPI Baja Right Side Engine Mount Brace - 874901 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Brake plate spacer RED - 874971 x 29cc Piston Rebuild Kit Set (36mm)1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x 2x Engine Clutch Bearing Metal Shielded (5x10x4mm)3 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Baja Bush Set - Red2 x HPI Baja stearing servo adapter mount2 x M3x5 Button Head Socket cap screws - bag 101 x 1x Savage Diff Cup Case1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Full X upgrade Kit1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Baja Front lower arm brace Red - 874811 x Innovative-RC Muggy radio tray set - Black1 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x I-RC Rear Baja Big Bore shock Spring - Progressive7 x Big Bore shock Spanner2 x Rear Fuel tank plate support bracket3 x 26cc piston (34mm)4 x Innovative-RC Hoodie - Size Small1 x Rear Heavy Duty Baja Shock Shaft - 8mm2 x Piston Pin 23 & 26cc - 8x25mm2 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws3 x 1x Losi Muggy Diff Cup - Silver1 x IRC Black HD Rear Big Bore Springs2 x HPI Baja Brake Calliper - Blue Anodized1 x Shock Hardware - screws, nuts etc2 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Out Drive Cup Pins - Bag 61 x Brake pad screws - IRC Center Tower to stock Pads1 x 8x Shock Standoffs - Standard Shocks1 x M4 Captive Nuts / T Nuts - Bag101 x Baja front lower arm brace Red - 874781 x Baja Rear lower arm brace Red - 874802 x Innovative-RC Hoodie - Size XXXX Large1 x 6x Screw Shaft M4x2x12mm2 x M8x25 Socket head cap screws - bag 61 x M6 Captive Nuts / T Nuts - Bag101 x Piston Snap Ring Set1 x 8x CEN Genesis Shock standoffs2 x Innovative-RC Hoodie - Size X Large1 x Baja Diff o-rings - bag102 x 4x Complete Innovative Silver Anodized Savage Shocks1 x M2.5x10mm Socket Head Cap Screw - Bag of 103 x Baja Shock Top Mounts - Rear1 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x Diff/Bulkhead Housing - Front Silver4 x CY 2 Bolt Gasket set rebuild kit2 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x Baja Bush Set - BLUE2 x HPI Baja Brake Calliper - Black Anodized1 x M3x8 Countersunk cap screws - bag 101 x CY Kill Switch Inc rubber cover3 x 2x Savage Diff Cup Case1 x IRC Hing Pin screw & washer set1 x Baja Bush Set - Black1 x UHD Dgobone Drive Pin Set 1/4"x25mm2 x Innovative-RC Muggy Chassis - Silver2 x Big Bore Shock 5 Hole Piston1 x Turnbuckle / Tie-Rod relocation bracket2 x I-RC Flywheel Puller tool1 x 6x Differential Gaskets - TT1 x Front Big Bore Shocks - Losi 5ive Silver1 x 4 Bolt Cylinder Gasket3 x IRC Red UHD Front big bore springs1 x Baja Front Upper Brace Blue - 874811 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x Baja Big Bore Shock O-Ring Kit1 x HPI Baja wheel drive pin - 965041 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x Innovative-RC Big Bore Shock Socks - Blue1 x Savage Rod End 10mm Balls1 x Piston Roller Pin Bearing1 x X Arm shock mounts - 4x1 x Baja Shock Spring Retainer - Slotted2 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x MCD & Savage Shock Spring -3mm1 x Losi 5ive Hing Pins A-Arms1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x Innovative-RC T-Shirt - Size XLarge2 x Shock Bottom End Cap2 x Crankcase engine Seal set - Viton type1 x MCD V4 RaceRunne Big Bore Shocks Blue V2 - Set 4x1 x ProLux Stone Fuel Filter - Grey1 x CY 29cc Piston ring - 36x1mm2 x Innovative-RC Hoodie - Size XXX Large1 x CY 4 Bolt Gasket set rebuild kit1 x Losi 5ive top shock mounts1 x Big Bore Shock 3 Hole Piston DUAL Rate2 x M8 Rod Ends for Big Bore Shocks1 x Innovative-RC T-Shirt - Size XXLarge1 x M6 Hank rivet bush - Bag101 x M5x5 Grub Set Screw3 x IRC Front MID Front big bore springs - Losi 5T2 x M3x16 Socket head cap screws - bag 102 x Innovative-RC T-Shirt - Size Medium1 x M4x30 Socket head cap screws - bag 101 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x NGK Spark Plug CMR7H1 x IRC ESC Box - MT41 x Piston Pin Washer Set1 x M4x4 Grub/Set Screw1 x High Response Clutch Spring - Red1 x Clear Anodized Shock Cap - Silver3 x CY Clutch case Housing1 x I-RC Losi Big Bore rear shock Spring - 66lb1 x Losi Titanium Grade 5 King Pins B20741 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Torx Screw Kit Elcon etc - High tensile Steel1 x Crankcase engine Seal set - Nitrile type2 x Carb & Exhaust screws - 154821 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x M4x4 Grub Screws1 x 2x Nitro Silicone Switch Cover - Futaba etc2 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long2 x Flywheel Nut2 x Innovative-RC Hoodie - Size Large4 x Savage Shock Bottom End Cap1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x 27cc (35mm) Cylinder Head 4 Bolt1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x TurtleRacing Rear shock mounts2 x Rear Big Bore Shocks - Losi 5ive Red1 x 6x Differential Gaskets3 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Big Bore Shock 3 Hole Piston2 x M3x10 Socket head cap screws - bag 101 x 4-40x3/8 Socket Head Cap Screw - Bag 102 x HPI Savage Screw kit (all models) - High tensile1 x IRC Hing Pins Full Set V2 - 10Pins2 x Innovative-RC T-Shirt - Size Large1 x Big Bore Shock 4 Hole Piston1 x M6 washers - Zinc plated bag 201 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x MCD & Savage Shock Spring - 2.5mm1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x Innovative-RC Mug1 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x Engine Clutch bottom spacer 6.5mm - 875711 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x Spur Gear Spacer - 866161 x Crank Case Engine Snap Ring2 x Shock Bleed Screw - 4x1 x Innovative-RC Hoodie - Size XX Large2 x 3x Losi 8ight-T Diff Cup - Black1 x NGK Spark Plug CMR5H1 x 26cc Piston Rebuild Kit Set (34mm)1 x Savage Big Bore Shock Springs - Stock1 x M4 Nylock nut bag of 201 x HPI Baja Screw Kit (all models) - High tensile1 x ProLux Light Weight rebuildable fuel filter - large1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black2 x M5 washers - Zinc plated bag 201 x Futaba type sliding charing switch1 x Shock Tower Brace - Blue1 x CY Replacement Crank Case Gasket1 x NGK Spark Plug CMR6H1 x ProLux Stone Fuel Filter - RED1 x O-Ring Diff Cups - 5.5x2mm1 x M3x3 Grub Set screw1 x CVD inner Drive set Pins 5x20mm1 x Air Filter Gasket1 x 29cc Piston (36mm)1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x CY 27cc Piston ring - 35x1mm
£4,407.24
Notifications
Notify me of updates to Innovative-RC HPI Baja enclosed chassis - SHORT BLUE
View All
Bestsellers
HPI BAja Left Side Engine Mount Brace BLUE - 87489 Innovative-RC HPI Baja under chassis brace V2 - Blue HPI Baja Right Side Engine Mount Brace Blue Anodized - 87490 HPI Baja Brake Calliper - Blue Anodized Innovative-RC HPI Baja 5B 5T enclosed chassis - BLUE HPI Baja Front Upper Plate 4mm Blue - 87484 HPI Baja stearing servo adapter mount - Blue HPI Baja Rear Chassis brace V2 Blue- 87483 + 87487 Rear Chassis Plate 7075-T6 V3 87482 - Blue HPI Baja Rear Brace 4mm Blue Anodized - 87488
Reviews
Innovative-RC HPI Baja 5B 5T enclosed chassis
Innovative-RC HPI Baja 5B 5T enclosed chassis
£120.00

Bought this amazing chassis, extremely please with it as it ...