Innovative-RC MT4 Chassis

75.59€

Product may vary slightly from image representation.
  • Model:MT4-chassis
Available Options
Live Stock Check: 0 units
Share This Product

 


Innovative-RC Thunder Tiger MT4 Chassis is made from 4mm 6082-T6 for the ultimate high strength chassis resulting in reduced chassis flex.

We have added chamfered droop areas to this chassis just like our Muggy chassis for vastly improved set-up for droop down travel adjustment allowing for even more performance enhancements for when racing on the track giving to a much improved ground handling over jumps and in tight corners allowing for more grip on the track for improved lap times!(adjustment of droop screws may be needed to retain a stock like setup)

Also added are custom mounting locations for  RX Box, Lipo battery tray, ESU Box allowing for a trayless setup to be run on the chassis (items available separate from innovative-RC).

Also included are 6x chassis gaskets for mounting under the front & rear diff/bulkheads to stop dirty entering into these areas. aiding in a longer gear and maintenance free life.

The chassis is available in Silver/Clear anodize , Black, Blue & Red anodized brushed finished surface.

Please pick colour to the side before ordering.
Please note this is a pre-order only listing, we hope to have this item in stock and shipping on or before 14/11/14. any questions please contact us,

Included Items:-
1x I-RC MT4 Chassis brushed anodized finished surface.
6x Chassis Diff Gaskets.
1x Set of stickers.

Items needed:
NONE

Optional Items:
Innovative-RC Battery Tray
Innovative-RC  RX Box
Innovative-RC  ESU Tray

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x M3x3 Grub Set screw1 x 50x 3.5mm Body Clip Bulk - Rpin2 x O-Ring Diff Cups - 5.5x2mm1 x 1x Losi Muggy Diff Cup - Silver1 x Big Bore shock Spanner2 x Cleon MMX stiffening chassis side panels - Red1 x Shock Cap O-Ring Spacers1 x Innovative-RC Muggy radio tray set - Black1 x M6 Captive Nuts / T Nuts - Bag101 x 4-40x3/8 Button Head socket Screw - Bag 102 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Big Bore Shock 3 Hole Piston DUAL Rate1 x Innovative-RC Muggy Chassis - Silver1 x Big Bore Shock 2 Hole Piston1 x IRC Red UHD rear big bore springs1 x Flux Black Anodized Standard LCG TVP Kit1 x M5 Captive Nuts / T Nuts - Bag102 x 6x Differential Gaskets1 x Innovative-RC Carbon Fiber replacement Pads1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x Innovative-RC Muggy radio tray set1 x Servo Y Lead JR, Futaba, Hitec etc1 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc2 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x Clear Anodized Shock Cap1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x MCD Fork Ends set 4 - M61 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x IRC BLACK MID rear big bore springs - Losi 5T1 x 1000mm (1M) Heavy Duty Servo Lead JR, Futaba, Hitec1 x 1x Losi Muggy Diff Cup - Black2 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x M5x5 Grub Set Screw1 x MCD & Savage Shock Spring -2.7mm1 x M2 Captive Nuts / T Nuts - Bag 101 x Innovative-RC Muggy Chassis - Black1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x 50x 6mm Body Clip Bulk - Rpin2 x Cleon MMX stiffening chassis side panels - Black1 x Flux Standard LCG TVP Kit1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x Baja Shock Spring Retainer - Slotted2 x 10x 6mm Body Clip - Rpin1 x Flux Black Anodized +6mm Front LCG TVP Kit1 x Baja Shock Top Mounts - Rear1 x Crank Case Sealed bearing 12x28x8- 60012RS2 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x MCD Fork Ends set 4 - M51 x Big Bore Shock 2 Hole Piston DUAL Rate1 x M3x5 Button Head Socket cap screws - bag 101 x M4x4 Grub/Set Screw1 x M3 Captive Nuts / T Nuts - Bag101 x Dgobone Drive Pin Set 5x24mm2 x 4mm flexable brake pipe1 x Brake pad screws - IRC Center Tower to stock Pads2 x Bearing Puller1 x 27cc (35mm) Cylinder Head 2 Bolt1 x 29cc (35mm) Cylinder Head - 2 Bolt - 38mm Skirt1 x Innovative-RC Hoodie - Size XXX Large3 x Big Bore Shock Body All Colours - Losi Front1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x 2x 17x30x7mm Ball Bearing Metal Shield- B0921 x IRC Front MID Front big bore springs - Losi 5T1 x 2x Losi LST1 & LST2 Diff Cup - Black2 x 5x10x0.3 Steel Shim - Pack 101 x Air Filter Gasket1 x Thunder Tiger Front/Rear outdrive1 x Carburetor Set WT6682 x 3x6x0.3 Steel Shim - Pack 101 x 26cc Piston Rebuild Kit Set (34mm)1 x G290RC Petrol RC Engine - 2 Stroke1 x 5x Fuel Pipe Clips - metal2 x 6x12x0.3 Steel Shim - Pack 101 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x Innovative-RC Hoodie - Size XX Large1 x Innovative-RC T-Shirt - Size XLarge1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Innovative-RC Big Bore Shock Socks - Green1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x 23cc piston (32mm)2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x Baja Brake Kit - Full Set all Models1 x SuperSwitchHD 2 Pac1 x IRC Hing Pins Rear Bottom V2 - 866351 x NGK Spark Plug CMR5H1 x FILTERED FUEL PICK UP CLUNK1 x 90Deg PushFit 4mm tube M51 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x 3x Thunder Tiger Differential Case MT4 G3 Red1 x Innovative-RC Big Bore Shock Socks - Blue1 x 27cc piston (35mm)1 x UHD Innovative-RC BAJA dogbones Standard- 1049662 x Engine Piston Stopper1 x differential cross pins TT MT4 - 2x1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x 26cc piston (34mm) - For 0.7mm Ring1 x IRC Red UHD Front big bore springs - Losi 5T1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x DBXL Top shock cap Bush 5mm1 x 23cc (32mm) Cylinder Head - 2 Bolt1 x HPI Savage Screw kit (all models) - High tensile1 x CVD Pin rebuild kit - B32172 x M5 Hank rivet bush - Bag101 x HPI Baja Right Side Engine Mount Brace - 874901 x G270RC Petrol RC Engine - 2 Stroke1 x 23cc (32mm) Cylinder Head - 4 Bolt1 x 26cc (34mm) Cylinder Head - 2 Bolt1 x SuperSwitchHD - 1x1 x T PushFit Connector 4mm1 x 2x 12x24x6mm Ceramic Ball Bearing Rubber Shield- B0891 x Baja Diff o-rings - bag101 x 4mm Nylon brake pipe1 x FILTERED FUEL PICK UP CLUNK Brass1 x M5 washers - Zinc plated bag 201 x Savage Big Bore shock Socks - Black1 x HPI MT2 Diff Cup Case Silver - 2x
Reviews
Ultra Heavy Duty Drive Shaft - Savge X, RTR, SS - V2
Ultra Heavy Duty Drive Shaft - Savge X, RTR, SS - V2
23.26€

got these bad boys next day after buying and wow, they make ...