Innovative-RC HPI Baja 5B 5T enclosed chassis - RED

139.54€

Product may vary slightly from image representation.
  • Model:87477-red
Available Options
Live Stock Check: 0 units
Share This Product

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Pre installed inserts for under chassis brace.

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- RED
1x Switch Blanking Plate
With Brace Included
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Innovative-RC TT MT4 trayless Kit - Black1 x ProLux Stone Fuel Filter - Blue1 x IRC Red UHD Front big bore springs2 x 2x 12x24x6mm Bll Bearing Metal Shield- B0892 x CVD Drive set Pins 4x20mm B65601 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x Rear Shock end Ball - 11mm1 x Losi 5T 5B Shock Towers V2 - Rear1 x Innovative-RC Big Bore Shock Socks - Green1 x Short Big Bore Rod Ends - M81 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x 2x 17x30x7mm Ball Bearing Metal Shield- B0921 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x 1x Losi 8ight-T Diff Cup - Black1 x Losi 5T 5B Shock Towers - Front1 x 1x Losi Muggy Diff Cup - Silver1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Futaba type sliding charing switch2 x SuperSwitchHD 2 Pac1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Innovative-RC Big Bore Shock Socks - Orange1 x Baja Shock spring retainer - Heavy Duty Springs1 x Smart-Fly - Pin & Flag1 x Baja Shock Spring Retainer - Slotted2 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Brake pad screws - M5 to IRC pads1 x 3x Thunder Tiger Differential Case MT4 G3 Red1 x Baja Brake Kit - Full Set all Models1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0893 x Innovative-RC Big Bore Shock Socks - Black1 x DBXL Top shock cap Bush 5mm1 x Savage Big Bore shock Socks - Black1 x M8 Rod Ends for Big Bore Shocks1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x Heavy Duty On/Off Switch & charging jack Futaba Type2 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long2 x CY Pull Start Assembly - Metal grab2 x Losi 5ive Engine mount inserts - #201 x 2x 17x30x7mm Ball Bearing Rubber Shield- B0921 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield2 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x SuperSwitchHD - 1x1 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x Failsafe-switch and small slide switch1 x Losi 5ive Hing Pins A-Arms2 x 10x 6mm Body Clip - Rpin1 x IRC Hing Pins Rear Hub V2 - 866361 x HPI Baja Brake Calliper - Blue Anodized1 x M3x3 Grub Set screw1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x Dgobone Drive Pin Set 5x24mm1 x Brake pad screws - IRC Center Tower to IRC Pads1 x Baja Diff bush - B0801 x Shock Tower Brace - Silver1 x Carburetor Set WT6681 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x M4x10 Button Head Socket cap screws - bag 101 x CY Exhaust Gasket1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x M6 Rod Ends - Right hand thread1 x 26cc piston (34mm) 4Bolt1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 4 Bolt Cylinder Gasket1 x Shock Cap O-Ring Spacers1 x 27cc (35mm) Cylinder Head 2 Bolt1 x 3x Losi Muggy Diff Cup - Black1 x Thunder Tiger Differential Case MT4 G3 - Red1 x 26cc (34mm) Cylinder Head - 2 Bolt1 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x HPI Baja stearing servo adapter mount1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x Crankcase engine Seal set - Nitrile type1 x Engine / Cylinder Cover 4 Bolt2 x CY stock crank set2 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE1 x 26cc piston (34mm) - For 0.7mm Ring1 x CY 2 Bolt Gasket set rebuild kit1 x 23cc (32mm) Cylinder Head - 2 Bolt1 x 23cc piston (32mm)1 x M3x25mm Socket Cap Screw - BAG 101 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x UHD Dgobone Drive Pin Set 1/4"x25mm2 x CY Engine FlyWheel (Rotor)1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x M4x12 Countersunk Socket head cap screws - bag 101 x 26cc piston (34mm)1 x Piston Roller Pin Bearing1 x HPI Baja wheel drive pin 5x24- 965042 x CY Replacement Crank Case Gasket1 x M4x12 Socket head cap screws - bag 101 x IRC Red UHD Front big bore springs - Losi 5T1 x Baja Bush Set - Black2 x CY 4 Bolt Gasket set rebuild kit1 x 6x Screw Shaft M4x2x12mm1 x M3 Captive Nuts / T Nuts - Bag101 x Big Bore Shock 2 Hole Piston DUAL Rate1 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x G290RC Petrol RC Engine - 2 Stroke1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x Piston Pin 23 & 26cc - 8x25mm1 x M4x30 Countersunk Socket head cap screws - bag 101 x Black Big Bore shock Spring Retainers - Aluminium1 x Pull Start Thumb Screws1 x NGK Spark Plug CMR7H - Box102 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x TurtleRacing Rear shock mounts1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Baja Bush Set1 x Baja Shock Top Mounts - Rear1 x 27cc Piston Rebuild Kit Set (35mm)2 x Baja Rear Lower Brace 2 - 874791 x 90Deg PushFit 4mm tube M51 x Holts Brake Cleaner1 x Out Drive Cup Pins - Bag 61 x Engine / Cylinder Cover 4 Bolt1 x Baja Front lower arm brace Red - 874811 x Shock Hardware - screws, nuts etc1 x 1x Losi Muggy Diff Cup - Black1 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x M4x30 Socket head cap screws - bag 101 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x Flywheel Key1 x T PushFit Connector 4mm1 x Baja Shock Spring Retainer - LST1 x M3x10 Socket head cap screws - bag 101 x 4-40x3/8 Button Head socket Screw - Bag 101 x HPI MT2 Diff Cup Case Black - 1x1 x Flywheel Nut1 x F230 4Bolt With Filter, Pullstart & Carb
Reviews
Flux Standard LCG TVP Kit
Flux Standard LCG TVP Kit
52.33€

had these a while now and have done some proper hard bashing...