Flux Black Anodized +6mm Front LCG TVP Kit

$68.64

Product may vary slightly from image representation.
  • Model:Flux-6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 6mm Extended Front over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right): 260grams
Skid Plate & Braces:95grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x Dgobone Drive Pin Set 5x24mm1 x IRC Red UHD rear big bore springs - Losi 5T1 x Losi 5ive Engine mount inserts - #202 x Baja Front Upper Brace Blue - 874811 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x IRC Hing Pins Front Bottom V2 - 866341 x insulator gasket3 x Innovative-RC Big Bore Shock Socks - Green1 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile2 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32163 x Innovative-RC Big Bore Shock Socks - Blue1 x Brake plate spacer Black - 874972 x Brake pad screws - M4 Tower to IRC pads1 x Baja Bush Set - BLUE1 x Baja Upper Front Arm Brace Upper Red1 x HPI Baja Front Upper Plate 4mm Black Anodized - 874841 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x HPI Baja Brake Calliper - Black Anodized1 x Losi 5ive Engine mount inserts - #191 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32182 x Engine Clutch bottom spacer Black - 875711 x Baja Upper Front Arm Brace Upper Blue1 x CVD Drive set Pins 4x20mm B65601 x HPI Baja Rear Brace 4mm Black Anodized - 874881 x HPI Baja Rear Chassis brace V2 Black - 87483 + 874871 x Baja Front lower arm brace Red - 874811 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x Crank Case Sealed bearing 12x28x8- 60012RS1 x Carburetor Set WT6681 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x Left Spacer Black - 875711 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x Exstended 1inch rear & 6mm Front Package & Dog bone - 4mm1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Baja Bush Set - Black1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x Crankcase engine Seal set - Nitrile type1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x Baja Brake Kit - Full Set all Models1 x CY Kill Switch Inc rubber cover1 x 5x 2.5x14mm CVD Dowel Pins1 x HPI Baja stearing servo adapter mount - Black1 x HPI BAja Left Side Engine Mount Brace Black Anodized - 874891 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x 10x 6mm Body Clip - Rpin1 x 26cc piston (34mm) - For 0.7mm Ring1 x HPI Baja Brake Calliper - Blue Anodized1 x CY 26cc Piston ring - 34x0.7mm1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 4mm Nylon brake pipe1 x Crank Case Engine Snap Ring1 x T PushFit Connector 4mm1 x HPI Baja Rear Chassis brace V2 - RED 87483 + 874871 x HPI Baja Front Upper Plate 4mm RED - 874841 x Baja Bush Set - Red1 x Big Bore shock Spanner1 x M3x3 Grub Set screw1 x 50x 6mm Body Clip Bulk - Rpin1 x 8x Shock Standoffs - Buggy Shocks
Reviews
Center Tower full kit
Center Tower full kit
$187.18

Fantastic Product - lighter and stronger than you think. Bea...