Flux Black Anodized 1"+6mm LCG TVP Kit

£65.00

Product may vary slightly from image representation.
  • Model:Flux-1_6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 1Inch Rear 6mm Front Extended over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: 1inch Rear & +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
1inch Rear using Innovative-RC 1inch Dogbone (I-RC part# 61210)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):293grams
Skid Plate & Braces: 100 grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set2 x HPI Baja Right Side Engine Mount Brace - 874901 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x Baja Big Bore Shock O-Ring Kit1 x Big Bore Shock Body All Colours - Losi Front1 x Out Drive Cup Pins - Bag 61 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x O-Ring Diff Cups - 5.5x2mm1 x 2x 12x24x6mm Ceramic Ball Bearing Rubber Shield- B0891 x Carb & Exhaust screws - 154821 x Baja Shock Spring Retainer - LST1 x M8x25 Socket head cap screws - bag 61 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x HPI Baja wheel drive pin - 965041 x Brake pad screws - M4 Tower to IRC pads1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Front - Antiroll Bar brace4 x Baja Rear Lower Brace 2 Blue - 874791 x M4x10 Button Head Socket cap screws - bag 102 x Front Heavy Duty losi Shock Shaft - 8mm1 x 2x 17x30x7mm Ball Bearing Metal Shield- B0921 x Right Clutch Spacer - 875552 x M5 Hank rivet bush - Bag101 x Baja Diff Cup side screws1 x 10x 6mm Body Clip - Rpin1 x CY 4 Bolt Gasket set rebuild kit1 x Big Bore Shock 3 Hole Piston DUAL Rate1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x innovative-rc Losi 5ive Diff Cup / Case1 x 50x 3.5mm Body Clip Bulk - Rpin1 x Black Anodized Roll Bar1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x HPI BAja Left Side Engine Mount Brace - 874891 x Big Bore shock Spring Retainers - Aluminium1 x 4mm flexable brake pipe1 x M3x5 Button Head Socket cap screws - bag 101 x M3x16 Socket head cap screws - bag 101 x Engine Clutch bottom spacer stock - 875711 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x HPI Baja Rear Brace 4mm - 874881 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x IRC Red UHD Front big bore springs - Losi 5T1 x Black Big Bore shock Spring Retainers - Aluminium1 x Steering Crank shaft1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x Roll Bar for HPI Savage 3mm1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Losi 5ive-T 2.0 servo saver Doube arm V2.04 x Baja Front Upper Brace Blue - 874811 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x M4x30 Countersunk Socket head cap screws - bag 101 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Baja front lower arm brace Red - 874781 x Front Plated Heavy Duty Baja Shock Shaft - 8mm2 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x Flywheel Nut1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x M8 Rod Ends for Big Bore Shocks3 x Baja Bush Set - BLUE1 x Baja Upper Front Arm Brace Upper Blue1 x IRC Front MID Front big bore springs - Losi 5T1 x M4x16 Countersunk Socket head cap screws - bag 101 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x M4x10 Socket head cap screws - bag 10
Reviews
Black Anodized Roll Bar
Black Anodized Roll Bar
£12.99

Super strong, yet suprisingly light at the same time... Fitt...