Flux Black Anodized 1"+6mm LCG TVP Kit

£65.00

Product may vary slightly from image representation.
  • Model:Flux-1_6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 1Inch Rear 6mm Front Extended over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: 1inch Rear & +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
1inch Rear using Innovative-RC 1inch Dogbone (I-RC part# 61210)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):293grams
Skid Plate & Braces: 100 grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Baja Diff Cup side screws1 x Battery box bracket HPI Rush box1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 2x Flanged Rubber Shield 10x6x3mm2 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x 1x Losi LST1 & LST2 Diff Cup - Black2 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x 4x Complete Innovative Black Anodized Savage Shocks1 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x Losi 5ive Engine mount inserts - #201 x Baja Shock spring retainer - Heavy Duty Springs2 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x 2x Losi LST1 & LST2 Diff Cup- silver3 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Baja front lower arm brace Red - 874781 x 50x 3.5mm Body Clip Bulk - Rpin1 x M3 Spring Washer Zinc plated - bag 202 x 1x Losi LST1 & LST2 Diff Cup- silver1 x Battery box bracket HPI Rush box - Savage X1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x 6x Screw Shaft M5x3x18mm2 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Big Bore Shock 5 Hole Piston DUAL Rate4 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x 2x 15x24x5mm Flanged Ball Bearing Metal Shield1 x M6 Rod Ends - Right hand thread1 x 8x CEN Genesis Shock standoffs2 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x Baja Front Upper Brace Black Anodized 7075-T6 - 874811 x HPI Baja Screw Kit (all models) - High tensile1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H3 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x Rear Big Bore Shocks - Losi 5ive Black1 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Innovative-RC Hoodie - Size Large1 x Baja Bush Set - Black1 x 4x Hong nor CRT Shock standoffs1 x Baja Bush Set1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 3x Thunder Tiger Differential Case MT4 G3 Black1 x Baja Diff gear holders2 x 2x Top shock support brackets - Savage x1 x 2x 10x15x4mm Ball Bearing Metal Shield- B0301 x M3x5 Button Head Socket cap screws - bag 101 x CVD inner Drive set Pins 5x22mm1 x IRC Hing Pins Rear Hub V2 - 866361 x 1x Losi Muggy Diff Cup - Silver1 x HPI Baja stearing servo adapter mount - Black2 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Losi 5ive drive cup Clips1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x 2x 12x24x6mm Bll Bearing Metal Shield- B0892 x 10x 3.5mm Body Clip - Rpin1 x Front Big Bore Shocks - Losi 5ive Black1 x Center Tower to Clutch suport brace V1.01 x 6x Differential Gaskets - TT1 x Baja Diff bush - B0801 x Baja Big Bore Shock O-Ring Kit1 x CVD Drive set Pins 4x20mm B65601 x 4x Complete Innovative Red Anodized Savage Shocks1 x IRC BLACK MID rear big bore springs - Losi 5T1 x M3x3 Grub Set screw1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x Losi 5ive Engine mount inserts - #191 x Center Tower top plate for truck V1.01 x Front Big Bore Shocks - Losi 5ive Red1 x 3x Thunder Tiger Differential Case MT4 G3 Red1 x 8x Shock Standoffs - Standard Shocks1 x O-Ring Diff Cups - 5.5x2mm1 x HPI Baja wheel drive pin - 965041 x Losi 5ive-T 2.0 servo single arm V2.01 x HPI MT2 Diff Cup Case Black - 1x1 x IRC Front MID Front big bore springs - Losi 5T1 x 6x Differential Gaskets1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x Baja Shock Spring Retainer1 x 10x 6mm Body Clip - Rpin1 x Baja Shock Top Mounts - Front1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x Baja Upper Front Arm Brace Upper Blue1 x M5 Hank rivet bush - Bag101 x 5x 2.5x14mm CVD Dowel Pins1 x 1x Losi Muggy Diff Cup - Black1 x Baja Rear Lower Brace 2 - 874791 x Baja Shock Top Mounts - Rear
Reviews
Skid Plate for Exstended 1inch back, 6mm Front TVPs
Skid Plate for Exstended 1inch back, 6mm Front TVPs
£12.00

got this last week and fits perfect and holds all the tvps n...