Flux Black Anodized +6mm Front LCG TVP Kit

£55.00

Product may vary slightly from image representation.
  • Model:Flux-6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 6mm Extended Front over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right): 260grams
Skid Plate & Braces:95grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x M5 Captive Nuts / T Nuts - Bag101 x M2.5 Nylock Nuts - Bag 101 x Flux Standard LCG TVP Kit1 x CY 4 Bolt Gasket set rebuild kit3 x Engine Clutch bottom spacer stock - 875711 x Short Big Bore Rod Ends - M81 x Baja Shock Top Mounts - Rear2 x Out Drive Cup Pins - Bag 61 x Black Big Bore shock Spring Retainers - Aluminium1 x 4mm Nylon brake pipe1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x ProLux Light Weight rebuildable fuel filter - large1 x 8x Shock Standoffs - Buggy Shocks1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Shock Hardware - screws, nuts etc1 x 2x Top shock support brackets - Savage x1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x M5x5 Grub Set Screw1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x HPI Baja Brake Calliper - Blue Anodized1 x M4x16 Countersunk Socket head cap screws - bag 101 x HPI Baja Front Upper Plate 4mm Blue - 874841 x HPI Baja Brake Calliper - Black Anodized1 x MCD & Savage Shock Spring - 2.0mm1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x Big Bore Shock 5 Hole Piston1 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x 27cc (35mm) Cylinder Head 2 Bolt1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x Innovative-RC Hong Nor CRT Chassis - Silver3 x M3x10 Socket head cap screws - bag 101 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x Baja Upper Front Arm Brace Upper1 x Baja Diff Cup side screws1 x Savage Shock Bottom End Cap1 x M4x16 Socket head cap screws - bag 101 x 26cc Piston Rebuild Kit Set (34mm)1 x 23cc piston (32mm)3 x Shock Tower Brace - Blue1 x Innovative-RC Big Bore Shock Socks - Orange1 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x 4-40x3/8 Button Head socket Screw - Bag 101 x ProLux Stone Fuel Filter - Grey2 x insulator gasket1 x HPI Baja wheel drive pin - 965042 x Baja Upper Front Arm Brace Upper Blue1 x HPI Baja Brake Calliper1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x V3 Front Big Bore Shocks - Baja 5B 5T1 x M3x16 Countersunk Socket head cap screws - bag 101 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x Clear Anodized Shock Cap - Silver1 x 4x Complete Innovative Silver Anodized Savage Shocks1 x Baja Diff gear holders1 x Clutch Shoe Holder Mount1 x Baja Front Lower Brace Blue - 874781 x Big Bore Shock 4 Hole Piston DUAL Rate1 x Black Anodized Shock Body1 x Front Big Bore Shocks - Losi 5ive Red1 x 26cc piston (34mm) 4Bolt1 x Engine Clutch bottom spacer Blue - 875711 x M3x8 Socket head cap screws - bag 101 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x 6x Differential Gaskets2 x Big Bore shock Spring Retainers - Aluminium1 x IRC Hing Pins Full Set V2 - 10Pins1 x Ceter tower diff mounts Front & Rear1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x M6 Rod Ends & camber ball set1 x M4 Captive Nuts / T Nuts - Bag101 x M3 Spring Washer Zinc plated - bag 201 x Center Tower throttle supports1 x ProLux Stone Fuel Filter - Blue1 x Center Tower to Clutch suport brace V1.01 x Brake plate spacer - 874971 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x Innovative-RC Dual Brake Kit1 x M3 washers - Zinc plated bag 201 x Baja Bush Set - BLUE1 x M2.5x12 Stainles Socket Cap Screw - Bag 101 x M4x30 Socket head cap screws - bag 101 x M4x10 Socket head cap screws - bag 101 x IRC Hing Pins Front Bottom V2 - 866341 x Engine Clutch bottom spacer 6.5mm - 875711 x M3x35 Socket head cap screws - bag 101 x Brake plate spacer Blue - 874971 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M
Reviews
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
£45.00

love these shafts they look and feel so sturdy have had no t...