F270 4Bolt W/+2 Stroker Crank

£190.00

Product may vary slightly from image representation.
  • Model:F270000000
Available Options
Live Stock Check: 0 units
Share This Product

This Chung Yank (CY) F270 is pre fitted with a +2 Stroker Crank making this engine have 29cc of volume.

NOTE: We can remove, Clutch, Clutch Housing, Air Filter, exhaust, carb etc to reduce cost for thoes that want to use there exisiting setups.

Chung Yang F270 engine (34mm bore, 30mm stroke - 27.2cc) with Walbro WT-668 carb. Includes 54mm inner clutch assembly pre-installed. Ready to bolt-on. Approx 3.25+ horsepower. Similar design to the Zenoah G240RC/G270RC - 4 transfer port hp cylinder, single ring piston, double sided finned flywheel, and hp exhaust canister. Engine requires 91 octane or higher fuel, mixed 25:1 with 2-cycle oil.


Comes as pictured, with plastic/foam air filter, and HP exhaust canister.

For R/C: Fits a wide variety of R/C cars, planes, boats, and helicopters. Same mounting dimensions as Zenoah G230RC / G260RC. For cars - fits FG: Marder, Leopard, Monster Beetle, Monster Truck, Stadium Truck, Pajero, etc. Also fits Duratrax Firehammer, XTM, Carson Attack, HPI Baja 5b, Traxxas Monster Buggy, and most other large scale onroad and offroad RC cars.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x M4x30 Countersunk Socket head cap screws - bag 102 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x 8x Shock Standoffs - Buggy Shocks1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x 6x Differential Gaskets2 x Baja Front Upper Brace Blue - 874811 x Savage Big Bore shock Socks - Black2 x Big Bore Shock 5 Hole Piston1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x Flux Black Anodized +6mm Front LCG TVP Kit1 x Left Spacer Black - 875711 x Losi 5ive Hing Pins A-Arms1 x Big Bore Shock Blank Piston2 x M3 Captive Nuts / T Nuts - Bag101 x I-RC Flywheel Puller tool1 x Innovative-RC Hoodie - Size X Large2 x 4mm Nylon brake pipe1 x Losi 5T 5B Shock Towers V2 - Rear2 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x M5 Hank rivet bush - Bag101 x Dgobone Drive Pin Set 5x24mm2 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty1 x Shock Bleed Screw - 4x1 x 6x Differential Gaskets - TT1 x Innovative-RC Hoodie - Size XXX Large1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Black Anodized Roll Bar1 x Innovative-RC Hoodie - Size Small1 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch3 x 2x Losi LST1 & LST2 Diff Cup- silver1 x M3 washers - Zinc plated bag 201 x Innovative-RC Hoodie - Size XXXX Large1 x 1x Losi Muggy Diff Cup - Silver2 x Big Bore shock Spanner3 x Innovative-RC Dual Brake Kit1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x UHD Innovative-RC BAJA dogbones Exstended- 1049662 x M4x30 Socket head cap screws - bag 103 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x Innovative-RC Muggy radio tray set1 x Innovative-RC Mug1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0942 x 26cc (34mm) Cylinder Head - 4 Bolt1 x 10x16x0.3 Steel Shim - Pack 101 x M6 Captive Nuts / T Nuts - Bag101 x 5x10x0.3 Steel Shim - Pack 101 x Flywheel Nut1 x HPI Baja Front Upper Plate 4mm Black Anodized - 874842 x Innovative-RC T-Shirt - Size Medium1 x insulator gasket1 x Outdrive cup shaft Orings1 x UHD 5mm Outdrive Rear HPI Baja 5SC size (2x) - 1049671 x MT4 Chassi Gaskets - 6x1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x Thunder Tiger Differential Case MT4 G3 - Red1 x 10x16x1.0 Steel Shim - Pack 101 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x Crankcase engine Seal set - Nitrile type1 x 2x Flanged 10x6x3mm1 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x Big Bore shock Spring Retainers - Aluminium1 x Black Anodized Standard LCG TVP Kit1 x Losi 5ive Front and rear shock end ball2 x Shock Hardware - screws, nuts etc1 x M4x4 Grub Screws1 x IRC Black HD Rear Big Bore Springs1 x Innovative-RC T-Shirt - Size Large1 x IRC BLACK MID rear big bore springs - Losi 5T1 x HPI Baja Front Upper Plate 4mm RED - 874841 x Losi 5T 5B Shock Towers - Front1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x TurtleRacing Rear shock mounts1 x Innovative-RC T-Shirt - Size XXLarge1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x HPI Baja wheel drive pin 5x24- 965041 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Innovative-RC Muggy Chassis - Black1 x 3x Losi 8ight-T Diff Cup - Silver1 x M3x20 Socket Cap Screws - Bag of 101 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x HPI Baja wheel drive pin 4x281 x Baja Bush Set - Black1 x Out Drive Cup Pins - Bag 6
Reviews
Shock Tower Brace - Black
Shock Tower Brace - Black
£4.50

Nice bit of kit, work well with stock shocks and towers too,...