Innovative-RC HPI Baja enclosed chassis - SHORT RED

$149.76

Product may vary slightly from image representation.
  • Model:87477-short
Available Options
Live Stock Check: 0 units
Share This Product

This Innovative-RC Baja SHORT Chassis

This Innovative-RC Baja Chassis has been custom made to build a short wheel base Baja, fits the HPI Baja 5B ,5SC & 5T. Made from high quality aluminium and available in 4 different colours (Silver/Clear anodized, Black, RED & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike giving a fully enclosed chassis.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled with inserts inserted for a front kick strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version) and Uber RC bumpers.

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.

this chassis is 1.75" (44.45mm) shorter than a stock chassis and made to take a full stock fuel tank witha coustom RX box. (note rx box not included). all other braces mount as normal.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets outside to keep weight down & maintaining strength
  • 680Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate included
  • 1.75" (44.45mm) shortened chassis
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Preinserted rivert for under skid & top brace.

 

Option Extra

Innovative-RC HPI Baja under chassis brace

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x NGK Spark Plug CMR5H3 x 5x10x0.3 Steel Shim - Pack 104 x 10x16x0.5 Steel Shim - Pack 103 x M5 Spring Washer Zinc plated - bag 201 x Thunder Tiger Front/Rear outdrive1 x Baja Rear Lower Brace 2 Blue - 874793 x M6 Hank rivet bush - Bag103 x M5 Hank rivet bush - Bag103 x Big Bore Shock 4 Hole Piston DUAL Rate3 x Baja Front Upper Brace Blue - 874813 x 4x8x0.3 Steel Shim - Pack 103 x M6 Rod Ends - Right hand thread4 x 6x12x0.3 Steel Shim - Pack 101 x Baja Bush Set - BLUE3 x HPI Baja Front Upper Plate 4mm Blue - 874841 x HPI Baja Brake Calliper - Black Anodized3 x 10x16x0.1 Steel Shim - Pack 102 x HPI Baja Brake Calliper - Blue Anodized2 x Piston Pin Washer Set1 x HPI Baja wheel drive pin - 965045 x 10x16x0.3 Steel Shim - Pack 101 x 10x 3.5mm Body Clip - Rpin2 x CY 27cc Piston ring - 35x1mm3 x M6 Captive Nuts / T Nuts - Bag101 x M6 Rod Ends & Steering ball set3 x 10x16x1.0 Steel Shim - Pack 103 x Baja Upper Front Arm Brace Upper Blue2 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x Flywheel Nut4 x 3x6x0.3 Steel Shim - Pack 101 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x IRC ESC Box - MT43 x 4x 5x10x4mm Ball Bearing Metal Shield- B0212 x 6x Differential Gaskets - TT4 x O-Ring Diff Cups - 5.5x2mm4 x 4mm flexable brake pipe1 x Baja Front Lower Brace Blue - 874783 x MT4 Chassi Gaskets - 6x4 x IRC RX Box Set - MT43 x Crank Case Sealed bearing 12x28x8- 60012RS3 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC1 x Big Bore shock Spring Retainers - Aluminium2 x Crankcase engine Seal set - Nitrile type2 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0303 x 2x Flanged Rubber Shield 10x6x3mm2 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x CY Exhaust Gasket2 x 90Deg PushFit 4mm tube M52 x CVD Drive set Pins 4x20mm B65601 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874902 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch4 x 4mm Nylon brake pipe2 x 2x 10x15x4mm Ball Bearing Metal Shield- B0301 x HPI Baja stearing servo adapter mount - Blue1 x 2x 12x24x6mm Ceramic Ball Bearing Rubber Shield- B0892 x Baja Shock Spring Retainer - Slotted2 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x Black Big Bore shock Spring Retainers - Aluminium3 x T PushFit Connector 4mm2 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC5 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x Outdrive cup shaft Orings1 x Air Filter Gasket3 x Titanium Exhaust Wrap1 x M3x10 Countersunk Socket head cap screws - bag 101 x 26cc (34mm) Cylinder Head - 2 Bolt1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M3 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Shock Tower Brace - RED1 x 4 Bolt Cylinder Gasket1 x Pull Start Thumb Screws1 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Heavy Duty On/Off Switch & charging jack Futaba Type3 x FILTERED FUEL PICK UP CLUNK Brass1 x Losi 5ive Front and rear shock end ball1 x Futaba type sliding charing switch1 x M3x12 Countersunk Socket head cap screws - bag 101 x 3x Losi 8ight-T Diff Cup - Black1 x Innovative-RC Foam Filter Oil - 100ml1 x 3x Losi 8ight-T Diff Cup - Silver1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm4 x ProLux Stone Fuel Filter - RED1 x 1x Losi 8ight-T Diff Cup - Silver1 x Baja Shock Top Mounts - Front1 x Rear Chassis Plate 7075-T6 V3 RED - 874822 x M3 Nylock nut bag of 201 x M3x16 Socket head cap screws - bag 101 x M3 Captive Nuts / T Nuts - Bag102 x Shock Cap O-Ring Spacers2 x Big Bore Shock 3 Hole Piston DUAL Rate1 x M2.5x6mm (For Engine Back/Cover plate) - Bag of 81 x IRC Red UHD Front big bore springs1 x M3 washers - Zinc plated bag 201 x M2.5x10mm Socket Head Cap Screw - Bag of 101 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x M3x10 Button Head Socket cap screws - bag 101 x M4x30 Countersunk Socket head cap screws - bag 102 x Piston Snap Ring Set1 x M3x12 Socket head cap screws - bag 101 x I-RC Losi Big Bore front shock Spring - 44lb1 x M2.5 Nylock Nuts - Bag 101 x IRC Red UHD rear big bore springs - Losi 5T3 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x I-RC Losi Big Bore rear shock Spring - 66lb2 x Baja Shock spring retainer - Heavy Duty Springs1 x Baja Shock Top Mounts - Rear2 x PROLUX FILTERED FUEL PICK UP CLUNK4 x ProLux Light Weight rebuildable fuel filter - large3 x FILTERED FUEL PICK UP CLUNK1 x M3x16 Countersunk Socket head cap screws - bag 101 x UHD Inner HPI Baja 5SC size drive cup (2x) - 1049656 x ProLux Stone Fuel Filter - Grey1 x M3 Spring Washer Zinc plated - bag 202 x 29cc Piston Rebuild Kit Set (36mm)2 x 5x Fuel Pipe Clips - metal1 x M2 Captive Nuts / T Nuts - Bag 101 x Servo Y Lead JR, Futaba, Hitec etc1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H2 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x 1x Losi 8ight-T Diff Cup - Black1 x M3x10 Socket head cap screws - bag 101 x M2.5x12 Stainles Socket Cap Screw - Bag 101 x 2x 20x32x7mm Ball Bearing Metal Shield- B0941 x CY 4 Bolt Gasket set rebuild kit2 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x CY 26cc Piston ring - 34x0.7mm1 x 2x Flanged 10x6x3mm1 x CY +2mm Stuffer Stroked Crank set1 x CVD inner Drive set Pins 5x20mm1 x Losi 5ive drive cup Clips1 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x IRC Hing Pins Front Bottom V2 - 866341 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0891 x CVD inner Drive set Pins 5x22mm1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x 2x 17x30x7mm Ball Bearing Rubber Shield- B0923 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0942 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x IRC Red UHD Front big bore springs - Losi 5T1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x 2x 12x24x6mm Bll Bearing Metal Shield- B0891 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x M4x30 Socket head cap screws - bag 101 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Diff/Bulkhead Housing Screw Set1 x 23mm Heavy Duty wheel hex - Complete Set (4x)1 x 2x Crankcase Engine Bearing - 12x28x8 6001-C32 x Carb & Exhaust screws - 154821 x DBXL Top shock cap Bush 5mm1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x 1x Losi Muggy Diff Cup - Silver1 x CY 2 Bolt Gasket set rebuild kit1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x Big Bore Shock Body All Colours - Losi Front1 x Clutch Spring - Yellow2 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x Front Heavy Duty losi Shock Shaft - 8mm1 x Rear Heavy Duty losi Shock Shaft - 8mm1 x Dgobone Drive Pin Set 5x24mm1 x IRC BLACK MID rear big bore springs - Losi 5T1 x Holts Brake Cleaner2 x HPI Baja Rear Brace 4mm - 874881 x HPI Baja Rear Chassis brace V2 Blue- 87483 + 874871 x Engine / Cylinder Cover2 x M4 Nylock nut bag of 201 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard2 x M4 Washer Zinc plated bag 201 x Rear Big Bore Shocks - Losi 5ive Silver1 x CVD Pin rebuild kit - B32171 x V3 Front Big Bore Shocks - Baja 5B 5T2 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x 4-40x3/8 Socket Head Cap Screw - Bag 102 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x Engine Clutch bottom spacer stock - 875713 x Innovative-RC TT MT4 trayless Kit - RED1 x NGK Spark Plug CMR7H1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x 4-40x3/8 Button Head socket Screw - Bag 101 x 6x Differential Gaskets1 x HPI BAja Left Side Engine Mount Brace - 874893 x LipoBox - 6S1 x Losi 5ive Hing Pins A-Arms1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive3 x Big Bore Shock 5 Hole Piston1 x M3x5 Button Head Socket cap screws - bag 101 x Big Bore Shock 2 Hole Piston DUAL Rate2 x Baja Diff Cup side screws1 x Shock Tower Brace - Blue1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x Steering Crank shaft1 x Baja Diff o-rings - bag103 x ProLux Stone Fuel Filter - Blue1 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x I-RC Baja Big Bore rear shock Spring - Stock1 x Black Shock Spring Adjuster Ring1 x IRC Hing Pin screw & washer set1 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x IRC Hing Pins Full Set V2 - 10Pins1 x CY Clutch case Housing1 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x Out Drive Cup Pins - Bag 61 x Losi 5ive-T 2.0 servo single arm V2.01 x 26cc piston (34mm)1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Losi Titanium Grade 5 King Pins B20741 x Piston Roller Pin Bearing
Reviews
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
UHD BASH CVD Shaft Front or Rear Losi 5ive (2x) - B3216
$56.16

love these shafts they look and feel so sturdy have had no t...