Innovative-RC HPI Baja 5B 5T enclosed chassis - RED

£120.00

Product may vary slightly from image representation.
  • Model:87477-red
Available Options
Live Stock Check: 0 units
Share This Product

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Pre installed inserts for under chassis brace.

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- RED
1x Switch Blanking Plate
With Brace Included
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 10x16x0.5 Steel Shim - Pack 102 x 2x Crankcase Engine Bearing - 12x28x8 6001-C32 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt1 x 2x Losi LST1 & LST2 Diff Cup - Black2 x Piston Pin 27 & 29cc - 8x281 x Black Anodized Shock Cap3 x Baja Big Bore Shock O-Ring Kit3 x Big Bore Shock 2 Hole Piston DUAL Rate1 x Air Filter Gasket1 x Innovative-RC Hong Nor CRT Chassis - Silver1 x CVD Pin rebuild kit - B32171 x Black Shock Spring Adjuster Ring1 x CY Clutch case Housing3 x Baja Rear Lower Brace 2 Blue - 874792 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x CY 4 Bolt Gasket set rebuild kit1 x Shock Hardware - screws, nuts etc4 x 4mm Nylon brake pipe3 x CY Kill Switch Inc rubber cover2 x 10x 6mm Body Clip - Rpin1 x Blue Anodized Shock Cap2 x M4x30 Countersunk Socket head cap screws - bag 101 x center tower brake cam set2 x Big Bore Shock 3 Hole Piston2 x 10x 3.5mm Body Clip - Rpin1 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty2 x HPI Baja wheel drive pin 4x282 x Baja Shock Spring Retainer - Slotted2 x M3x16 Socket head cap screws - bag 101 x 3x Losi Muggy Diff Cup - Silver2 x M4 Nylock nut bag of 201 x Rear Big Bore Shocks - Losi 5ive Silver1 x Carburetor Set WT6682 x CY 29cc Piston ring - 36x1mm1 x Losi DBXL front & rear shock end ball1 x Piston Roller Pin Bearing1 x 4x Complete Innovative Silver Anodized Savage Shocks3 x M8x25 Socket head cap screws - bag 61 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Shock Bush short1 x IRC Hing Pin screw & washer set1 x M4x30 Socket head cap screws - bag 102 x LipoBox - 6S1 x ProLux Stone Fuel Filter - RED1 x 2 Bolt heavy duty Cylinder Gasket1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws3 x ProLux Light Weight rebuildable fuel filter - large1 x IRC BLACK MID rear big bore springs - Losi 5T1 x Steering Crank shaft2 x Big Bore Shock 4 Hole Piston4 x Crankcase engine Seal set - Viton type2 x Big Bore shock Spanner1 x Outdrive cup shaft Orings1 x Losi Titanium Grade 5 King Pins B20743 x Baja Front Upper Brace Blue - 874812 x Carb & Exhaust screws - 154821 x Engine Plate for LCG TVPs Savage X & LCG TVPs1 x 2x 9x24x7mm Ball Bearing Rubber Shield2 x Innovative-RC Big Bore Shock Socks - Black1 x High Response Clutch Spring - Red1 x Petrol Fuel Tube pipe ID3.2mm OD4.9mm Blue - 1M long1 x losi 5ive diff inserts1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x Baja Shock Top Mounts - Rear1 x Innovative-RC T-Shirt - Size Large2 x insulator gasket1 x 26cc (34mm) Cylinder Head - 2 Bolt1 x HPI Savage Screw kit (all models) - High tensile2 x Innovative-RC Hoodie - Size X Large2 x CY Replacement Crank Case Gasket1 x Losi 5ive Spring Retainers1 x HPI MT2 Diff Cup Case Black - 1x1 x 50x 3.5mm Body Clip Bulk - Rpin1 x Baja Bush Set - BLUE1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x HPI Baja Brake Calliper - Blue Anodized2 x 3x Thunder Tiger Differential Case MT4 G3 Silver1 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC2 x Innovative-RC Foam Filter Oil - 100ml1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Big Bore Shock 3 Hole Piston DUAL Rate2 x 10x16x1.0 Steel Shim - Pack 101 x Front - Antiroll Bar brace1 x M6 Rod Ends - Right hand thread1 x I-RC Losi Big Bore rear shock Spring - 44lb2 x Big Bore Shock 4 Hole Piston DUAL Rate1 x Big Bore Shock Blank Piston1 x V2 Savage + MCD Heavy Duty Baja Shock Shaft - 8mm1 x M3x16 Countersunk Socket head cap screws - bag 101 x NGK Spark Plug CMR7H - Box101 x Innovative-RC HPI Baja under chassis brace V2 - RED1 x TurtleRacing Rear shock mounts2 x Baja Diff Cup side screws1 x Pull Start Thumb Screws2 x Innovative-RC HPI Baja under chassis brace V2 - Silver1 x 23cc (32mm) Cylinder Head - 4 Bolt1 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE2 x 26cc Piston Rebuild Kit Set (34mm)2 x Crankcase engine Seal set - Nitrile type1 x M6 Hank rivet bush - Bag101 x Clear Anodized Shock Cap - Silver1 x Brake pad screws - M4 Tower to IRC pads1 x 4 Bolt Cylinder Gasket2 x M2.5 Nylock Nuts - Bag 103 x CY Engine FlyWheel (Rotor)1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm3 x HPI Baja wheel drive pin 5x24- 965041 x 2x 12x24x6mm Ball Bearing Rubber Shield- B0893 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver2 x Losi 5ive Spring Adjuster Ring1 x Innovative-RC Hoodie - Size Large1 x Baja Diff gear Drive pin - 965012 x M8 Rod Ends for Big Bore Shocks1 x Thunder Tiger Differential Case MT4 G3 Black1 x I-RC Flywheel Puller tool1 x Out Drive Cup Pins - Bag 61 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x CVD Drive set Pins 4x20mm B65603 x Shock Cap O-Ring Spacers1 x CY Exhaust Gasket1 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T1 x Innovative-RC Hoodie - Size XXX Large1 x 29cc Piston Rebuild Kit Set (36mm)2 x Big Bore Shock 5 Hole Piston DUAL Rate1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x 3x Thunder Tiger Differential Case MT4 G3 Red1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield2 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x 1x Savage Diff Cup Case1 x Rear Fuel tank plate support bracket2 x I-RC Losi Big Bore front shock Spring - 44lb2 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts2 x I-RC Front Baja Big Bore shock Spring - MID Progressive3 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long2 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x M5 Captive Nuts / T Nuts - Bag101 x Innovative-RC Hoodie - Size Small2 x M4x12 Socket head cap screws - bag 102 x IRC Hing Pins Full Set V2 - 10Pins1 x M3x35 Socket head cap screws - bag 101 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x M4x4 Grub/Set Screw1 x SuperSwitchHD - 1x1 x Heavy Duty On/Off Switch & charging jack Futaba Type1 x HPI BAja Left Side Engine Mount Brace - 874891 x M8x20 Socket head cap screws - bag 61 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0302 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Center Tower throttle supports2 x Crank Case Sealed bearing 12x28x8- 60012RS1 x CY Pull Start Assembly1 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x Shock O-Ring Kit1 x M3 Captive Nuts / T Nuts - Bag101 x Failsafe-switch and small slide switch1 x 23mm Heavy Duty wheel hex - Complete Set (4x)2 x Titanium Exhaust Wrap1 x IRC Red UHD Front big bore springs - Losi 5T1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Shock Bottom End Cap1 x O-Ring Diff Cups - 5.5x2mm1 x CY Pull Start Assembly - Metal grab1 x Engine / Cylinder Cover1 x I-RC Rear Baja Big Bore shock Spring - Progressive1 x 26cc piston (34mm)2 x IRC ESC Box - MT41 x Roll Bar for HPI Savage 3mm1 x M6 Rod Ends & camber ball set1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Baja Shock Spring Retainer - LST1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x Front Plated Heavy Duty Baja Shock Shaft - 8mm2 x Flywheel Nut1 x Thunder Tiger Differential Case MT4 G3 - Red2 x 10x16x0.1 Steel Shim - Pack 101 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x HPI Baja Right Side Engine Mount Brace Blue Anodized - 874902 x X Upgrade Kit1 x MCD & Savage Shock Spring - 2.0mm1 x MCD & Savage Shock Spring - 2.5mm1 x M4 Captive Nuts / T Nuts - Bag101 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x Baja front Shock end Ball1 x 23cc & 26cc CrankCase Set - INC Bearings + Seals 2bolt2 x 27cc (35mm) Cylinder Head 4 Bolt1 x CY Flywheel / Fan Cover1 x Bearing Puller1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x M6 washers - Zinc plated bag 201 x Center Tower top plate for truck V2.01 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x Wheel Spacer Adapters - GRP & MCD Wheels1 x 3x6x0.3 Steel Shim - Pack 101 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x M5 Hank rivet bush - Bag101 x MCD & Savage Shock Spring -2.7mm1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x M4 Washer Zinc plated bag 201 x 5x Fuel Pipe Clips - metal1 x FILTERED FUEL PICK UP CLUNK1 x 50x 6mm Body Clip Bulk - Rpin1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x NGK Spark Plug CMR7H1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0941 x IRC Hing Pins Front Bottom V2 - 866341 x ProLux Stone Fuel Filter - Blue1 x Innovative-RC Big Bore Shock Socks - Green
Reviews
Flux Standard LCG TVP Kit
Flux Standard LCG TVP Kit
£45.00

had these a while now and have done some proper hard bashing...