Innovative-RC HPI Baja enclosed chassis - SHORT RED

$149.76

Product may vary slightly from image representation.
  • Model:87477-short
Available Options
Live Stock Check: 0 units
Share This Product

This Innovative-RC Baja SHORT Chassis

This Innovative-RC Baja Chassis has been custom made to build a short wheel base Baja, fits the HPI Baja 5B ,5SC & 5T. Made from high quality aluminium and available in 4 different colours (Silver/Clear anodized, Black, RED & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike giving a fully enclosed chassis.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled with inserts inserted for a front kick strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version) and Uber RC bumpers.

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.

this chassis is 1.75" (44.45mm) shorter than a stock chassis and made to take a full stock fuel tank witha coustom RX box. (note rx box not included). all other braces mount as normal.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets outside to keep weight down & maintaining strength
  • 680Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate included
  • 1.75" (44.45mm) shortened chassis
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Preinserted rivert for under skid & top brace.

 

Option Extra

Innovative-RC HPI Baja under chassis brace

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
2 x Piston Roller Pin Bearing2 x Clutch Shoe Holder Mount2 x CY stock crank set1 x High response clutch set - Red Spring1 x CY 29cc Piston ring - 36x1mm2 x 2 Bolt heavy duty Cylinder Gasket1 x Baja Big Bore Shock O-Ring Kit4 x 26cc Piston Rebuild Kit Set (34mm)2 x Crankcase engine Seal set - Viton type2 x 26cc (34mm) Cylinder Head - 2 Bolt1 x Crank Case Sealed bearing 12x28x8- 60012RS2 x 27cc & 29cc CrankCase Set - INC Bearings + Seals2 x Piston Snap Ring Set4 x Piston Pin 23 & 26cc - 8x25mm4 x 4 Bolt Cylinder Gasket2 x 23 / 26cc & 27cc 4 Bolt Crankcase Set4 x TurtleRacing Rear shock mounts3 x Carburetor Set WT6682 x Innovative-RC Foam Filter Oil - 100ml2 x Piston Pin 27 & 29cc - 8x286 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x High response clutch set - Yellow Spring2 x 29cc Piston Rebuild Kit Set (36mm)4 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard4 x Carb & Exhaust screws - 154821 x Rear Big Bore Shocks - Losi 5ive Silver1 x insulator gasket2 x High Response Clutch Spring - Red1 x Shock Tower Brace - Black2 x CY 27cc Piston ring - 35x1mm1 x 4x Complete Innovative Silver Anodized Savage Shocks2 x Air Filter Gasket4 x CY Clutch case Housing1 x UHD Innovative-RC BAJA dogbones Standard- 1049662 x Black Slotted Big Bore shock Spring Retainers - Aluminium2 x Pull Start Thumb Screws2 x CY Engine FlyWheel (Rotor)2 x I-RC Rear Baja Big Bore shock Spring - Progressive4 x 29cc Piston (36mm)2 x Innovative-RC Full Bearing Kit Rubber shielded - Baja 5B 5T 5SC2 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x UHD Dgobone Drive Pin Set 1/4"x25mm2 x CY Kill Switch Inc rubber cover1 x HPI MT2 Diff Cup Case Silver - 1x1 x Big Bore Shock 5 Hole Piston DUAL Rate1 x 10x 6mm Body Clip - Rpin2 x CY 26cc Piston ring - 34x0.7mm1 x I-RC Flywheel Puller tool1 x 24mm Wheel Nuts - GRP & MCD Wheels7 x Big Bore shock Spanner1 x M8 Rod Ends for Big Bore Shocks4 x Innovative-RC HPI Baja under chassis brace V2 - RED5 x IRC Red UHD rear big bore springs3 x 26cc (34mm) Cylinder Head - 4 Bolt3 x Engine / Cylinder Cover 4 Bolt2 x Shock Bleed Screw - 4x1 x HPI Baja Rear Brace 4mm - 874881 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch1 x Losi 5ive Hing Pins A-Arms1 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x Innovative-RC Big Bore Shock Socks - Green1 x I-RC Losi Big Bore rear shock Spring - 44lb1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x X Arm shock mounts - 4x3 x Losi 5ive Engine mount inserts - #202 x HPI Baja Front Upper Plate 4mm Black Anodized - 874844 x CY Replacement Crank Case Gasket1 x CY 4 Bolt Gasket set rebuild kit1 x HPI BAja Left Side Engine Mount Brace - 874891 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt2 x Big Bore Shock 2 Hole Piston1 x 27cc (35mm) Cylinder Head 2 Bolt3 x IRC Hing Pins Rear Hub V2 - 866361 x 4-40x3/8 Socket Head Cap Screw - Bag 102 x Engine Clutch bottom spacer stock - 875711 x Maxima Air Filter Cleaner - Spray1 x Center Tower throttle supports1 x NGK Spark Plug CMR7H - Box101 x Baja Diff Cup side screws2 x Baja Rear Lower Brace 2 - 874794 x CVD Drive set Pins 4x20mm B65602 x O-Ring Diff Cups - 5.5x2mm2 x Outdrive cup shaft Orings3 x Out Drive Cup Pins - Bag 62 x Engine Clutch bottom spacer 6.5mm - 875712 x Wheel Spacer Adapters - GRP & MCD Wheels1 x M5 washers - Zinc plated bag 201 x Innovative-RC Big Bore Shock Socks - Black2 x Engine / Cylinder Cover3 x CY Flywheel / Fan Cover1 x M4 Washer Zinc plated bag 201 x 2x Crankcase Engine Bearing - 12x28x8 6001-C31 x 5x 2.5x14mm CVD Dowel Pins2 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x HPI Baja Screw Kit (all models) - High tensile1 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x Shock Bottom End Cap1 x M4 Nylock nut bag of 201 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm4 x HPI Baja wheel drive pin 5x24- 965041 x M5 Captive Nuts / T Nuts - Bag101 x Shock Tower Brace - Blue3 x M5 Hank rivet bush - Bag102 x M3x10 Socket head cap screws - bag 102 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x Ultra Heavy Duty Rear Center Dogbone - 83mm2 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x Losi 5ive Engine mount inserts - #191 x Holts Brake Cleaner1 x Flywheel Key2 x CY Pull Start Assembly3 x Baja Brake Kit - Full Set all Models3 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x 2x Losi LST1 & LST2 Diff Cup- silver2 x F230 4Bolt With Filter, Pullstart & Carb2 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x M3 Nylock nut bag of 201 x 1x Losi LST1 & LST2 Diff Cup- silver1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm2 x Steering Crank shaft2 x CY Exhaust Gasket1 x Thunder Tiger Differential Case MT4 G3 - Red1 x IRC Hing Pins Full Set V2 - 10Pins1 x UHD CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x CY Insulator manifold1 x NGK Spark Plug CMR7H1 x CVD inner Drive set Pins 5x20mm1 x M4 Spring Washer Zinc plated - bag 203 x M4x16 Countersunk Socket head cap screws - bag 101 x M5 Spring Washer Zinc plated - bag 201 x IRC Red UHD Front big bore springs - Losi 5T2 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0942 x Short Big Bore Rod Ends - M81 x IRC Front MID Front big bore springs - Losi 5T1 x Black Shock Spring Adjuster Ring1 x M4x30 Socket head cap screws - bag 101 x M4x16 Socket head cap screws - bag 101 x HPI Baja wheel drive pin 4x281 x MCD & Savage Shock Spring - 2.0mm1 x 2x Flanged 10x6x3mm1 x M6 Rod Ends & camber ball set2 x Black Big Bore shock Spring Retainers - Aluminium1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x CY Ignition Coil assembly1 x M4 Captive Nuts / T Nuts - Bag101 x Losi 5T 5B Shock Towers - Front1 x M6 Captive Nuts / T Nuts - Bag101 x M3 Captive Nuts / T Nuts - Bag101 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x Engine Clutch bottom spacer RED - 875712 x SuperSwitchHD 2 Pac1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x Flywheel Nut1 x Big Bore Shock 3 Hole Piston1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Silver1 x Losi 5ive Spring Adjuster Ring1 x Clutch Spring - Yellow1 x CY +2mm Stuffer Stroked Crank set1 x Losi 5ive Front and rear shock end ball1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x M6 Rod Ends - Right hand thread2 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x IRC BLACK MID rear big bore springs - Losi 5T1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x M3x8 Countersunk cap screws - bag 101 x HPI MT2 Diff Cup Case Black - 1x1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLACK1 x V3 Rear Big Bore Shocks - Baja 5B 5T1 x CY 26cc Piston ring - 34x1mm1 x 29cc (36mm) Cylinder Head - 2 Bolt - 40mm Skirt2 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec3 x IRC Red UHD rear big bore springs - Losi 5T1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x 6x12x0.3 Steel Shim - Pack 101 x IRC Red UHD Front big bore springs1 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Blue - 1M long1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x I-RC Losi Big Bore rear shock Spring - 66lb1 x 6x Differential Gaskets & 4x Bevel Diff Cup Shafts1 x Baja Shock Top Mounts - Rear1 x Baja Shock Spring Retainer - LST1 x HPI Baja Brake Calliper - Blue Anodized1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x 23mm Heavy Duty Wheel Hex -right hand wheel hex bodies1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x IRC Black HD Rear Big Bore Springs1 x Turnbuckle / Tie-Rod relocation bracket1 x M3x12 Socket head cap screws - bag 101 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x Brake plate spacer Blue - 874971 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x 3x Losi Muggy Diff Cup - Silver2 x Front Big Bore Shocks - Losi 5ive Silver1 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0301 x Shock O-Ring Kit1 x IRC Hing Pin screw & washer set1 x M3x16 Socket head cap screws - bag 101 x V3 Rear Big Bore Shocks - Baja 5B 5T - RED1 x Innovative-RC Hoodie - Size X Large
Reviews
High response clutch set - Red Spring
High response clutch set - Red Spring
$22.45

<p>great quality for price need to keep these in stock</p>...