Innovative-RC HPI Baja 5B 5T enclosed chassis

$155.22

Product may vary slightly from image representation.
  • Model:87477
Available Options
Live Stock Check: 0 units
Share This Product

 

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Pre installed inserts for chassis brace
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts

 

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

 

 

I bought a silver one recently off Rob having seen them on various test cars at the MMR weekend, and because I bent my stock chassis on the last day. Its a very nice looking chassis, and its almost shamefuil it will be scratched to buggery within a few weeks, but hey ho thats what they're for. I like the fact the side rails are not cut out, to help minimise the grass and bits getting in. I also like the blanking plate for the the power switch, so if you move the switch you can blank that bit off as well. Its well thought out, with mysterious holes pre drilled for up and coming optional extras and its very well made. Mine went back together like a dream, although with my alloy GH front shock supports, the fit was tight but correct. Stock chassis or one of these ? its a no brainer really Hosster

Rated by Shaun Howe

What can i say, awesome!!! so much stronger than stock and being enclosed keeps the mess out of the insides, cant rate highly enough, fantastic product at a great price, every baja should have 1 for a bashers video review check out the S.C.B gallery thread on www.baja-forum.co.uk,

Rated by Alan Parker

Bought this amazing chassis, extremely please with it as it looks great and feels solid. Well done innovative great bit of craftsmanship. Just wondering your considering making a quick diff transmission case? Next on the list big bore shocks, I be back innovative. Thanks for the great service

Rated by Zach Kassapi

Hello j'ai demandé a rob ce chassis pour un ami qui n'était plus en stock ma demande a était traité tellement vite que le lendemain ce même chassis etait de nouveau en stock mais en peu d'exemplaires donc je pense que c'était en réponse a ma demande et rien que pour sa irc et toute l'équipe restera vraiment mon fabriquant que j'estime de plus en plus n'importe quelle demande est traité et exécuté le plus rapidement possible je demande toujours des petits plus dans mes commandes et a chaque fois c'est positif contrairement a certains autre ou tout est tout le temps il est beaucoup plus difficile de demander des petits bonus ou autres et pour parler de la qualité et des prix de vos produits c'est encore pareil que du positif j'espère vraiment que vous continuerai a nous sortir et vendre des produits qu'on ne trouve pas ailleurs ou alors beaucoup plus cher,sa ne fait que 6mois que je suis dans le 1/5ème mais honnêtement depuis que j'ai vu les produits irc a l'oeuvre j'ai tout de suite accroché donc voila si vous cherchez quelque chose de fiable et beau a prix plus que raisonnable vous êtes au bon endroit,ne vous arretez pas au produit qui ne sont pas en stock vu que sur simple demande le produit peut être réalisé ou etre mis a jour tres rapidement enfin bon voila continuez comme sa vous êtes au top merci.

Rated by Bastian Drut
Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x CVD inner Drive set Pins 5x20mm1 x Baja Brake Kit - Full Set all Models1 x Brake pad screws - M4 Tower to IRC pads1 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x Baja Front Upper Brace Blue - 874811 x Losi 5T,5B,Mini Screw Kit (all models) - High tensile1 x CY Exhaust Gasket1 x IRC Red UHD Front big bore springs1 x Losi 5ive-T 2.0 servo single arm V2.01 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Engine Clutch bottom spacer stock - 875711 x HPI Baja Rear Lower Brace Blue - 874801 x UHD Innovative-RC BAJA dogbones Standard- 1049661 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x Carburetor Gasket1 x 29cc Piston (36mm)1 x Innovative-RC Hoodie - Size Large1 x 1x Savage Diff Cup Case1 x Baja Bush Set - BLUE1 x UHD Dgobone Drive Pin Set 1/4"x25mm1 x CY Clutch case Housing1 x Losi 5ive Hing Pins A-Arms1 x 4 Bolt Cylinder Gasket1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x Front Heavy Duty losi Shock Shaft - 8mm1 x 10x16x0.5 Steel Shim - Pack 101 x Ultra Heavy Duty Front Center Dogbone - 78mm1 x HPI Baja wheel drive pin 4x281 x HPI Baja Rear Brace 4mm - 874881 x 300mm Servo Extention Lead(30cm/11.8") JR, Futaba, Hite1 x Engine / Cylinder Cover1 x Baja Front Lower Brace Blue - 874781 x Diff/Bulkhead Housing - Rear Silver B25421 x Engine / Cylinder Cover 4 Bolt1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x IRC Hing Pins Rear Hub V2 - 866361 x Rear Big Bore Shocks - Losi 5ive Silver1 x UHD CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Shock Bleed Screw - 4x1 x Baja Rear Lower Brace 2 Blue - 874791 x Losi 5T 5B Shock Towers V2 - Rear1 x CY 29cc Piston ring - 36x1mm1 x Losi 5ive Engine mount inserts - #201 x Shock Cap O-Ring Spacers1 x I-RC Baja Big Bore rear shock Spring - Stock1 x RACE CVD Shaft Set Front or Rear Losi 5IVE-T (2x) - B32161 x Carburetor Set WT6681 x Turnbuckle / Tie-Rod relocation bracket1 x IRC Hing Pins Front Top V2 - 866331 x I-RC Losi Big Bore front shock Spring - 44lb1 x UHD Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B3212 V21 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 5x 2.5x14mm CVD Dowel Pins1 x Ultra Heavy Duty Rear Center Dogbone - 83mm1 x 2x 20x32x7mm Ceramic Ball Bearing Rubber Shield- B0941 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard1 x Shock Bush short1 x Baja Diff Cup side screws1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x Baja Diff bush - B0801 x O-Ring Diff Cups - 9.5mmx2.5mm1 x Shock Tower Brace - Silver1 x Diff/Bulkhead Housing - Front Silver1 x Short Big Bore Rod Ends - M81 x Innovative-RC Hoodie - Size Small1 x 6x Differential Gaskets1 x Front Big Bore Shocks - Losi 5ive Black1 x M4 Captive Nuts / T Nuts - Bag101 x Piston Pin 27 & 29cc - 8x281 x Rear Big Bore Shocks - Losi 5ive Black1 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x CVD inner Drive set Pins 5x22mm1 x Baja Bush Set - Black1 x ProLux Light Weight rebuildable fuel filter - large1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x Steering Crank shaft1 x 27cc (35mm) Cylinder Head 2 Bolt1 x 50x 6mm Body Clip Bulk - Rpin1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x 750mm Heavy Duty Servo Extention Lead(70cm/29.5") JR, Futaba etc1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x CY 2 Bolt Gasket set rebuild kit1 x Servo Y Lead JR, Futaba, Hitec etc1 x M6 Rod Ends & camber + steering ball set1 x Shock O-Ring Kit1 x Baja Bush Set1 x HPI Savage Screw kit (all models) - High tensile1 x CY Engine FlyWheel (Rotor)1 x Black Anodized 1inch back & 6mm front Extended TVP Kit & Dog bon1 x M3 Captive Nuts / T Nuts - Bag101 x M4x10 Socket head cap screws - bag 101 x I-RC Front Baja Big Bore shock Spring - MID Progressive1 x 26cc Piston Rebuild Kit Set (34mm)1 x HPI Baja wheel drive pin 5x24- 965041 x M3x12 Countersunk Socket head cap screws - bag 101 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x 27cc Piston Rebuild Kit Set (35mm)1 x 500mm Servo Extention Lead(50cm/19.68") JR, Futaba, Hite1 x SuperSwitchHD - 1x1 x center tower brake cam set1 x Rear Chassis Plate 7075-T6 V3 - 87482 - Black1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Savage Shock Bottom End Cap1 x 2x 17x30x7mm Ceramic Ball Bearing Rubber Shield- B0921 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x DBXL Top shock cap Bush 5mm1 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x V3 Rear Big Bore Shocks - Baja 5B 5T BLUE1 x Losi 5ive Diff Gaskets - 6x1 x HPI Baja Front Upper Plate 4mm - 87484 SHORTY1 x UHD ENCLOSED Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x M6 Rod Ends - Left hand thread1 x Torx Screw Kit Elcon etc - High tensile Steel1 x Baja Diff o-rings - bag101 x Losi 5ive Front and rear shock end ball1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x 2x Top shock support brackets - Savage x1 x HPI Baja stearing servo adapter mount1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x 2x Savage Diff Cup Case1 x TurtleRacing Rear shock mounts1 x M8 Rod Ends for Big Bore Shocks1 x Petrol Fuel Tube pipe ID 3.2mm OD4.9mm Yellow - 1M long1 x Baja Shock Spring Retainer - Slotted1 x Big Bore Shock 2 Hole Piston1 x Out Drive Cup Pins - Bag 61 x 4x 5x10x4mm Ball Bearing Metal Shield- B0211 x Black Adjuster Ring1 x Innovative-RC Big Bore Shock Socks - Black1 x V3 Front Big Bore Shocks - Baja 5B 5T BLACK1 x 4-40x3/8 Button Head socket Screw - Bag 101 x M5 Hank rivet bush - Bag101 x Innovative-RC HPI Baja under chassis brace V2 - Black1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x M5 Captive Nuts / T Nuts - Bag101 x 29cc Piston Rebuild Kit Set (36mm)1 x Engine Clutch bottom spacer 6.5mm - 875711 x 100mm Servo Extention Lead(10cm/3.9") JR, Futaba, Hitec1 x HPI Baja Brake Calliper - Blue Anodized1 x HPI BAja Left Side Engine Mount Brace - 874891 x Center Tower to Clutch suport brace V2.01 x 3x Thunder Tiger Differential Case MT4 G3 Silver1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x M4x12 Socket head cap screws - bag 101 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x 3x Losi 8ight-T Diff Cup - Black1 x V3 Front Big Bore Shocks - Baja 5B 5T BLUE1 x Big Bore shock Spanner1 x M3x10 Socket head cap screws - bag 101 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x Black Big Bore shock Spring Retainers - Aluminium1 x I-RC Front Baja Big Bore shock Spring - Progressive1 x Big Bore shock Spring Retainers - Aluminium1 x M4x30 Countersunk Socket head cap screws - bag 101 x 2x Flanged Rubber Shield 10x6x3mm1 x I-RC Rear Baja Big Bore shock Spring - MID Progressive1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Crank Case Sealed bearing 12x28x8- 60012RS1 x 2 Bolt heavy duty Cylinder Gasket1 x 10x16x0.3 Steel Shim - Pack 101 x insulator gasket1 x Black Shock Spring Adjuster Ring
Reviews
Ultra Heavy Duty Drive Shaft - Savge X, RTR, SS - V2
Ultra Heavy Duty Drive Shaft - Savge X, RTR, SS - V2
$25.87

Just received Dog Bones for Savage Flux V2, very pleased wit...