Flux Black Anodized 1"+6mm LCG TVP Kit

75.59€

Product may vary slightly from image representation.
  • Model:Flux-1_6kit
Live Stock Check: 0 units
Share This Product

Innovative-RC HPI Savage Flux chassis - 1Inch Rear 6mm Front Extended over standard Flux TVPs.

This package contains everything needed to fit the HPI Savage Flux with Innovative-RC LCG TVPs giving a direct replacement over the HPI Flux TVPs.
Built using our proven Nitro TVP Design we have  incorporated these elements into our Flux TVP package. Including the ability to use the Innovative-RC nitro mid tank RX Box & Tank place up front making plenty of room in the front centre to house many goodies much more easy.
Uses Standard Flux motor plate so wide range of engine plates to chose from, or you can use the Innovative-RC Flux Motor Plate.

Like all Innovative-RC items these TVPs carry an innovative-RC Life time warranty also so you can bash as hard as you like with peace of mind.

Part Specs are as follows :-

.: 1inch Rear & +6mm Front Flux TVPs:-
These TVPs lowered on the motor and Gearbox giving the savage a more stable and lower ride hight. These are made from 4mm Thick Aluminium 6082-T6 giving a added 60% overall of strength to the savage chassis. Cut outs designed to give lightness but also added strength.

TVP Specs are:
6mm Front extension using stock HPI 84mm dog bone front and back (HPI part#.86056 / I-RC 86152)
1inch Rear using Innovative-RC 1inch Dogbone (I-RC part# 61210)
Extra clearance for bigger motor Mounts.
Takes Standard Nitro and Innovative-RC 3mm Roll Bar no mods to fit.
Includes extra clearance for Innovative-RC Savage X & non-X Shock mounting kits Tie-Rod Full clears
Note: 6082-T6 gives up to 18% more strength than conventional 6061-T6

Skid plate Specs :-
2mm Thick Skid Plate with mounting bars to fit.
The Screws are countersunk into the skid plate to offer screw clearance and smooth flush fixing to the bottom of the TVPs.


 


.:Weight:.
TVP (Left & Right):293grams
Skid Plate & Braces: 100 grams

.:Included:.
2x TVPs (Left & Right)
1x 86mm Dog Bone
1x Skid Plate
2x Skid Plate Braces
1x Screw Set to mount TVPs.

Replaces part # HPI 100902

Life Time Warranty

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x Outdrive cup shaft Orings1 x HPI Baja stearing servo adapter mount - Black1 x O-Ring Diff Cups - 5.5x2mm1 x Flywheel Nut2 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x Short Big Bore Rod Ends - M81 x 26cc Piston Rebuild Kit Set (34mm) - 4 Bolt1 x 4mm Nylon brake pipe2 x 4x Stainles SHOCK BUSHINGS / Standoffs With Screws1 x Innovative-RC T-Shirt - Size Medium2 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Innovative-RC Foam Filter Oil - 100ml1 x IRC Hing Pins Full Set V2 - 10Pins1 x 2x Losi LST1 & LST2 Diff Cup - Black1 x Shock Bush short1 x IRC Hing Pins Rear Top V2 - 866351 x Innovative-RC Big Bore Shock Socks - Orange1 x Innovative-RC Big Bore Shock Socks - Green1 x Motorex Air Filter Oil - spray1 x Savage Big Bore shock Socks - Black1 x Innovative-RC Big Bore Shock Socks - Purple1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x HPI Baja Brake Calliper - Black Anodized1 x Shock Cap O-Ring Spacers1 x HPI Baja Brake Calliper2 x 1x Losi LST1 & LST2 Diff Cup- silver1 x 2x 20x32x7mm Ball Bearing Rubber Shield- B0943 x 4-40x3/8 Socket Head Cap Screw - Bag 102 x Front Heavy Duty losi Shock Shaft - 8mm1 x Rear Fuel tank plate support bracket2 x 2x 10x15x4mm Ceramic Ball Bearing Rubber Shield- B0302 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x High response clutch set - Yellow Spring1 x Innovative-RC Big Bore Shock Socks - Black1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Standard 5mm1 x Steering Crank shaft1 x Baja Rear Lower Brace 2 - 874793 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x Innovative-RC T-Shirt - Size XXLarge1 x SuperSwitchHD - 1x1 x 2x Flanged 10x6x3mm1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32122 x Silkolene - Foam Filter Oil 1L2 x Baja Upper Front Arm Brace Upper Blue1 x 2x 15x32x9mm Ceramic Ball Bearing Rubber Shield1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended 5mm1 x IRC BLACK MID rear big bore springs - Losi 5T1 x Baja Shock Top Mounts - Front2 x Engine Piston Stopper2 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x CRT Tower Set - Nickel1 x 2x 12x24x6mm Bll Bearing Metal Shield- B0891 x Pull Start Thumb Screws1 x Baja Diff o-rings - bag101 x M3 washers - Zinc plated bag 201 x Losi 5ive Diff Gaskets - 6x2 x M3x3 Grub Set screw1 x 3x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black2 x 4-40x1/2 Socket Head Cap Screw - Bag 102 x M6 Hank rivet bush - Bag101 x Black Shock Spring Adjuster Ring1 x Losi 5T 5B Shock Towers Bash - Rear BLUE1 x Rear Big Bore Shocks - Losi 5ive Black2 x Crank Case Sealed bearing 12x28x8- 60012RS1 x LCG TVPs, 4mm Exstended 6mm front (rear dogbone up front)1 x Losi 5ive Spring Retainers1 x T PushFit Connector 4mm1 x 2x 20x32x7mm Ball Bearing Metal Shield- B0941 x 2x Crankcase Engine Bearing - 12x28x8 6001-C32 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32161 x CY Replacement Crank Case Gasket1 x HPI MT2 Diff Cup Case Silver - 1x1 x Rear Big Bore Shocks - Losi 5ive Red1 x UHD Innovative-RC BAJA dogbone set (cups & shafts) Exstended1 x M8 Rod Ends for Big Bore Shocks1 x CVD Booted F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x ProLux Stone Fuel Filter - Grey1 x Innovative-RC Big Bore Shock Socks - Blue1 x 2x 17x30x7mm Ball Bearing Metal Shield- B0921 x 6x12x0.3 Steel Shim - Pack 101 x 2x 5mm Thick Top Mount Brackets - Savage X1 x Engine Clutch bottom spacer RED - 875711 x CY +2mm Stuffer Stroked Crank set1 x Baja Front Upper Brace Blue - 874811 x 4x Complete Innovative Silver Anodized Savage Shocks1 x HPI MT2 Diff Cup Case Black - 1x2 x Big Bore Shock 5 Hole Piston DUAL Rate1 x 2x 9x24x7mm Ball Bearing Rubber Shield1 x CY Exhaust Gasket1 x Clutch Spring - Yellow1 x 1x Savage Diff Cup Case1 x Clutch Shoe Holder Mount1 x Losi DBXL Brake Kit1 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x 2x 17x30x7mm Ball Bearing Rubber Shield- B0921 x 10x 6mm Body Clip - Rpin1 x CY 29cc Piston ring - 36x1mm1 x Bearing Puller1 x M4x16 Socket head cap screws - bag 102 x Maxima Air Filter Cleaner - Spray1 x Baja Big Bore Shock O-Ring Kit1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x Engine / Cylinder Cover 4 Bolt1 x 2x 15x32x9mm Ball Bearing Rubber Shield - TR Clutch1 x 5x 2.5x14mm CVD Dowel Pins1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x Air Filter Gasket1 x Diff/Bulkhead Housing - Rear Silver B25421 x I-RC Losi Big Bore front shock Spring - 44lb1 x CY 4 Bolt Gasket set rebuild kit1 x Innovative-RC Hoodie - Size XXXX Large1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Big Bore Shock Body All Colours - Losi Front1 x Losi Titanium Grade 5 King Pins B20741 x 10x16x0.3 Steel Shim - Pack 101 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x 4x Complete Innovative Red Anodized Savage Shocks1 x HPI Baja Screw Kit (all models) - High tensile1 x insulator gasket1 x Innovative-RC Hoodie - Size X Large1 x M3x16 Socket head cap screws - bag 101 x Shock Hardware - screws, nuts etc1 x CY stock crank set2 x Front Axel - Thunder Tiger MT4 CVD Universal1 x Black Adjuster Ring1 x Shock Tower Brace - Silver1 x Black Big Bore shock Spring Retainers - Aluminium1 x Piston Roller Pin Bearing1 x Front Thunder Tiger MT4 CVD Universal drive shaft set1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x Brake pad screws - M4 Tower to IRC pads2 x Losi 5ive Engine mount inserts - #181 x NON FLAT UHD Dgobone Drive Pin Set 1/4"x25mm1 x Engine / Cylinder Cover 4 Bolt1 x Engine Clutch bottom spacer 6.5mm - 875711 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x MCD & Savage Shock Spring - 2.0mm1 x PROLUX FILTERED FUEL PICK UP CLUNK1 x 6x Differential Gaskets1 x Innovative-RC Muggy Chassis - Silver1 x Rear Thunder Tiger MT4 CVD Universal drive shaft set1 x Innovative-RC Full Bearing Kit Metal shielded - Baja 5B 5T 5SC1 x Losi 5ive top shock mounts1 x 5x10x0.3 Steel Shim - Pack 101 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts
Reviews
Black Anodized Roll Bar
Black Anodized Roll Bar
15.11€

Super strong, yet suprisingly light at the same time... Fitt...