Baja Differential cup / case set - Silver

$99.84

Product may vary slightly from image representation.
  • Model:IRC-85427
Available Options
Live Stock Check: 6 units
Share This Product

Full replacement Differential cup/case set for the HPI Baja (all models - 5B,5SC,SS,5T), This cup is the same dimentions as the stock HPI cup/case so is a direct replacement part.

Diff cup/case is made from high grade 7075-T6 for the best weight to strnegth ratio and long life. Anodized in a clear or black finish comes complete with all internal parts shown (diff gear holders,Bush B080, bearing B030, O-rings, Seals, Hardend and ground drive pin (4x18mm), 2xshims and fixing screws (M4x16 BZP socket cap)).

Please note, we recomend dry assemble of the diff first to check gear mesh & shimming for best fit and readjust if and where needed. Tthe included 10x24x1.0mm shim is used to replace stock shim 87474.

We have also included 2x speshial Oil filled bush to replace B080, these release oil over time to help lubricate the dirve cup shaft and give very long life. 
also included are 4x Bearings (B030), this allows to mix and match between bush & bearing setup or bearing only or bush only setups. 

Recomended setup: we recomend bearing on outdrive cup, and a bush on the inside of cup.

included items:
4x diff gear holders,
4x Bush B080, - Recomended on 35cc+, run all 4 and no  bearings!
4x O-rings, (2 spare)
3x Seals, (2 spare)
2x Hardend and ground drive pin (4x18mm),
2x main gear shims
2x Side screws
4x fixing screws M4x16 BZP socket cap
4x shake proof washers M4

OPTION EXTA
4x bearing B030, - only recomended on 35cc or below.!s M4

 

Compatibility
Stock Gear box - YES
TR Gear Box - YES
Integy Gear Box - YES
HPI Stock Gear (HPI86480) - YES
HPI HD Gear (HPI85481) - YES
blackbone ring gear - yes no mods
this is not a complete list and may work with unlisted items, this is what coustoms have let us know that work.

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x M4x4 Grub/Set Screw2 x Baja Rear lower arm brace Red - 874802 x Baja Front Upper Brace Blue - 874811 x T PushFit Connector 4mm2 x Baja Upper Front Arm Brace Upper Blue1 x Innovative-RC Muggy Chassis - Black1 x Shock Cap O-Ring Spacers2 x Big Bore Shock 5 Hole Piston DUAL Rate1 x 4mm flexable brake pipe2 x Baja Shock Top Mounts - Front1 x Big Bore Shock 2 Hole Piston DUAL Rate1 x CVD Drive set Pins 4x20mm B65602 x M5 Hank rivet bush - Bag101 x Outdrive cup shaft Orings1 x 8x Shock Standoffs - Standard Shocks1 x 2x Flanged 10x6x3mm1 x Baja Rear Lower Brace 2 Blue - 874791 x Losi Titanium Grade 5 King Pins B20741 x Shock Tower Brace - RED1 x Front Plated Heavy Duty Baja Shock Shaft - 8mm1 x I-RC Losi Big Bore rear shock Spring - 66lb2 x Baja Front Lower Brace Blue - 874782 x 4mm Nylon brake pipe1 x Tygon Yellow Fuel Pipe - 3.2mm(1/8")ID 6.4mm(1/4")OD - 1M1 x Baja front lower arm brace Red - 874781 x M4x30 Socket head cap screws - bag 102 x Losi 5ive-T 2.0 servo single arm V2.02 x Losi 5T 5B Shock Towers Bash - Front SILVER1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x M6 Rod Ends & camber + steering ball set1 x I-RC Losi Big Bore front shock Spring - 44lb1 x HPI Baja Brake Calliper - Blue Anodized1 x Losi 5T,5B, Mini Servo Saver spring - V1 and V2.0 trucks1 x Center Tower bearing set1 x Center Tower top plate for truck V1.01 x M5x5 Grub Set Screw1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long2 x Baja Front lower arm brace Red - 874811 x Titanium Exhaust Wrap1 x M6 Rod Ends & Steering ball set1 x Shock Bottom End Cap1 x IRC Red UHD Front big bore springs1 x Innovative-RC Big Bore Shock Socks - Blue2 x Losi 5T 5B Shock Towers Bash - Front BLACK1 x Baja Upper Front Arm Brace Upper Red1 x HPI Baja Rear Brace 4mm - 874881 x Baja Front Lower Brace Black Anodized 7075-T6 - 874781 x 600mm Heavy Duty Servo Extention Lead(60cm/23.6") JR, Futaba, Hi1 x Losi 5T 5B Shock Towers Bash - Front RED1 x IRC Hing Pins Full Set V2 - 10Pins1 x Long 250mm Servo Y Lead Heavy Duty JR, Futaba etc1 x 5x Servo Clips - Lead Lock for Servo Leads - BAG 51 x PROLUX FILTERED FUEL PICK UP CLUNK1 x Baja Shock Top Mounts - Rear1 x Baja Shock spring retainer - Heavy Duty Springs1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x Losi 5T 5B Shock Towers - Front1 x 23mm Heavy Duty wheel hex - Complete Set (4x)2 x 10x 6mm Body Clip - Rpin1 x 150mm Servo Y Lead Heavy Duty JR, Futaba, Hitec etc1 x Engine Clutch bottom spacer stock - 875711 x 23mm Heavy Duty wheel hex - Complete Set (4x) BLACK1 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x HPI BAja Left Side Engine Mount Brace BLUE - 874891 x M8 Rod Ends for Big Bore Shocks1 x Crankcase engine Seal set - Viton type1 x ProLux Stone Fuel Filter - Grey1 x 23mm Heavy Duty wheel hex - 2x Left Hand Nuts1 x 1x Losi Muggy Diff Cup - Black1 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x IRC Hing Pins Front Top V2 - 866331 x Innovative-RC Foam Filter Oil - 100ml1 x M4x12 Socket head cap screws - bag 101 x IRC Red UHD rear big bore springs - Losi 5T1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x 4-40x3/8 Socket Head Cap Screw - Bag 101 x 4x Complete Innovative Red Anodized Savage Shocks1 x M4x4 Grub Screws1 x Innovative-RC Full Bearing Kit Rubber Shilded - Losi 5iver-T1 x Engine Piston Stopper1 x Big Bore Shock 4 Hole Piston DUAL Rate1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x Diff/Bulkhead Housing Bearings - 9x24x7mm1 x Baja Rear lower arm brace Red - 874791 x 4-40x3/8 Button Head socket Screw - Bag 101 x Baja Front Lower Brace - 874781 x 10x 3.5mm Body Clip - Rpin1 x HPI Baja wheel drive pin - 965041 x Losi 5ive Hing Pins A-Arms1 x Big Bore Shock 4 Hole Piston1 x 1000mm (1M) Heavy Duty Servo Lead JR, Futaba, Hitec1 x 2x 9x20x6mm Ball Bearing Rubber Shield1 x Baja Shock Spring Retainer - Slotted1 x 23mm Heavy Duty Wheel Hex - Left hand wheel hex bodies1 x 1x Losi LST1 & LST2 Diff Cup- silver1 x Baja Upper Front Arm Brace Upper1 x 6x12x0.3 Steel Shim - Pack 101 x IRC BLACK MID rear big bore springs - Losi 5T1 x ProLux Stone Fuel Filter - Blue1 x Baja Shock Spring Retainer - LST1 x Nitro Engine Piston Stopper1 x 2x 9x24x7mm Ball Bearing Rubber Shield1 x 150mm (5.9") Heavy Duty Servo Extention Lead JR, Futaba, Hitec1 x G290RC Petrol RC Engine - 2 Stroke1 x Brake pad screws - IRC Center Tower to stock Pads1 x CVD F/R stub Axle Losi 5IVE-T, MINI WRC (2x) - B32241 x 1inch Extended Chassis Rear Long Dog Bone - Ultra Heavy Duty2 x M8x25 Socket head cap screws - bag 61 x Big Bore Shock Blank Piston1 x Petrol Fuel Tube pipe ID3.2mm OD6mm Yellow - 1M long1 x Big Bore Shock 3 Hole Piston DUAL Rate1 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C) - Black1 x Losi 5ive Engine mount inserts - #201 x G270RC Petrol RC Engine - 2 Stroke1 x 1x Losi 8ight-T Diff Cup - Black1 x 1x Savage Diff Cup Case1 x M8x20 Socket head cap screws - bag 61 x 5x Fuel Pipe Clips - metal1 x 1x Losi 8ight-T Diff Cup - Silver1 x Baja Rear Lower Brace 2 Black Anodized 7075-T6 - 874791 x M4x10 Socket head cap screws - bag 101 x 1x Lightning Stadium (LSP) Diff Cup Case (B,F,C)- silver1 x HPI Baja wheel drive pin 5x24- 965041 x Servo Y Lead JR, Futaba, Hitec etc1 x 4x8x0.3 Steel Shim - Pack 101 x 2x 15x24x5mm Flanged Ball Bearing Metal Shield1 x 300mm (30cm/11.8") Heavy Duty Servo Extention Lead JR, Futaba, H1 x 2x 20x32x7mm Ball Bearing Metal Shield- B0941 x Losi 5ive Engine mount inserts - #191 x Baja Shock Spring Retainer1 x Out Drive Cup Pins - Bag 6
Reviews
High response clutch set - Red Spring
High response clutch set - Red Spring
$22.45

<p>great quality for price need to keep these in stock</p>...