Innovative-RC HPI Baja 5B 5T enclosed chassis - BLUE

139.54€

Product may vary slightly from image representation.
  • Model:87477-BL
Available Options
Live Stock Check: 0 units
Share This Product

 

This Innovative-RC Baja Chassis

This Innovative-RC Baja Chassis has been custom made to fit the HPI Baja 5B will also fit the 5T. Made from high quality aluminium and available in 3 different colours (Silver/Clear anodized, Black Anodized & Blue Anodized). This chassis has been CNC machined inside and out with lightening pockets on the inside and also the outside to help keep weight down while maintaining the best strength possible for bashers and racers alike.

This chassis was designed with keeping the dreaded dirt and grass out of key areas of the chassis while maintaining weight and strength ratios. This chassis has a Pre-cut battery slot on the side of the chassis for stock battery switch location, but includes a blanking plate with screws for free, to cover up this hole (see photos below) giving the option to have the battery switch mounting in a alternative location giving maximum dirt protection from entering the chassis areas.

This chassis is also pre drilled for front kick up strengthening plate (option extra), meaning no more drilling holes by hand, the same mounting hole is also pre drilled to take a worx front bumper (extended version)

Chassis also has 4x pre inserted fixing rivets for the front top support brace (87484) giving a strong secure fixing just like the stock chassis no more nuts and bolts.


Chassis Specification & overview:

  • Made from hight quality aluminium
  • Pre Drilled for Front kick up stiffening plate & bumpers (optional extra)
  • Lightening pockets inside and out to keep weight down & maintaining strength
  • 710Grams, same weight as stock chassis (measured on the same scales for comparison
  • Battery blanking plate
  • Side Pod dirt mounting holes (option extra)Compatible with all Innovative-RC Parts & Stock parts
  • Pre installed Reivets for under chassis brace

 

 

Innovative-RC HPI Baja under chassis brace - Silver

 

This brace fix's under the front kickup on the HPI Stock chassis and also the Innovative-RC Chassis which is predrilled ready for this brace. (non Innovative-RC Chassis will require drilling for rear mounting holes of brace) This is made from 4mm thick Aluminum and Clear anodized finished.

Simply remove your stock skid plate and mount this under the plastic skid plate with provided screws and hardware.
to fix with using the 2x provided rivets please drill the 5mm holes to 7.4mm
Also works with worx skid plate with rear mouting screws.

Weight: 95.00 Grams

included
1x Front under chassis brace- Silver
2x M5x20 Countsunk screws
2x M5x40 Countersunk screws
2x M5x16 Countersunk screws
2x M5 Screw Rivits

Your S & R Text. Could be a copy of what is in shipping.php, a precis of it, a link to it, etc. Whatever you decide you need...
Manufacturers
Share This Product
1 x 450mm Heavy Duty Servo Extention Lead(45cm/17.7") JR, Futaba, Hi1 x 2x 15x28x7mm Ball Bearing Rubber Shield1 x Clutch Shoe Holder Mount2 x Holts Brake Cleaner1 x 2x Losi LST1 & LST2 Diff Cup- silver1 x Losi 5ive Diff Gaskets - 6x1 x Losi Titanium Grade 5 King Pins B20741 x Losi 5T 5B Shock Towers Bash - Rear BLACK2 x Baja Shock Spring Retainer - Slotted1 x CY Clutch case Housing1 x Pull Start Thumb Screws1 x 26cc piston (34mm) - For 0.7mm Ring1 x 2x 15x24x5mm Flanged Ball Bearing Rubber Shield1 x IRC Hing Pins Full Set V2 - 10Pins1 x 1x Losi LST1 & LST2 Diff Cup - Black1 x F230 4Bolt With Filter, Pullstart & Carb1 x 4mm flexable brake pipe1 x Diff/Bulkhead Housing Screw Set1 x IRC Red UHD rear big bore springs - Losi 5T1 x Center Tower to Clutch suport brace V2.01 x Center Tower throttle supports1 x HPI Baja Rear Lower Brace Black Anodized 7075-T6 - 874801 x Servo Y Lead JR, Futaba, Hitec etc1 x 3x Losi Muggy Diff Cup - Black1 x HPI Baja wheel drive pin - 965041 x RACE CVD Shaft Front or Rear Losi 5ive (2x) - B32162 x Losi 5T 5B Shock Towers - Front1 x F270 4Bolt With Filter, Pullstart & Carb1 x 10x16x0.5 Steel Shim - Pack 101 x 27cc Piston Rebuild Kit Set (35mm)2 x HPI Baja Brake Calliper - Blue Anodized1 x 24mm Wheel Nuts - GRP & MCD Wheels1 x Out Drive Cup Pins - Bag 61 x Losi 5ive Engine mount inserts - #181 x Losi DBXL Brake Kit1 x 23 / 26cc & 27cc 4 Bolt Crankcase Set1 x CY Exhaust Gasket1 x 27cc & 29cc CrankCase Set - INC Bearings + Seals1 x Wheel Spacer Adapters - GRP & MCD Wheels3 x Losi 5ive-T 2.0 servo single arm V2.01 x Engine / Cylinder Cover 4 Bolt2 x Steering Crank shaft1 x Brake pad screws - IRC Center Tower to IRC Pads2 x Crankcase engine Seal set - Viton type1 x MCD V4 RaceRunner Big Bore Shocks Black V2 - Set 4x1 x M5 Hank rivet bush - Bag101 x Shock Tower Brace - RED2 x Big Bore Shock 4 Hole Piston DUAL Rate1 x 10x16x0.3 Steel Shim - Pack 101 x I-RC Front Baja Big Bore shock Spring - Progressive1 x Diff/Bulkhead Housing Bearings - 15x28x7mm1 x M6 Rod Ends - Left hand thread1 x UHD Innovative-RC BAJA dogbones Exstended- 1049661 x Baja Brake Kit - Full Set all Models1 x Center Tower top plate for truck V2.01 x HPI Baja Rear Brace 4mm Blue Anodized - 874881 x CY 26cc Piston ring - 34x0.7mm1 x 2x 9x24x7mm Ball Bearing Rubber Shield1 x Ceter tower diff mounts Front & Rear3 x 10x 6mm Body Clip - Rpin2 x Torx Screw Kit Elcon etc - High tensile Steel1 x Innovative-RC Losi 5ive wheel extenders - 19mm (3/4")1 x 1x Losi LST1 & LST2 Diff Cup- silver2 x CY 29cc Piston ring - 36x1mm4 x 4mm Nylon brake pipe1 x Innovative-RC Hoodie - Size Large2 x CRT Chassis Gaskets1 x M6 Rod Ends & camber ball set1 x Tygon Petrol Fuel pipe 6.4ID - Tygon yellow - 1M long1 x 2x Nitro Silicone Switch Cover - Futaba etc1 x RACE Outdrive F/R Axle Losi 5IVE-T, MINI WRC (2x) - B32121 x Engine / Cylinder Cover 4 Bolt1 x 2x 10x15x4mm Ball Bearing Rubber Shield- B0301 x Big Bore Shock 4 Hole Piston1 x UHD Center Drive brake Cup Losi 5IVE-T, MINI WRC, 5B - B3211 x Black Slotted Big Bore shock Spring Retainers - Aluminium1 x Losi 5ive Engine mount inserts - #191 x Baja Upper Front Arm Brace Black Anodized 7075-T61 x Losi 5ive Engine mount inserts - #201 x RACE CVD Shaft Front Center Losi 5ive - TLR252013 / LOSB32181 x Losi 5ive-T 2.0 servo saver Doube arm V2.01 x SuperSwitchHD - 1x1 x MCD V4 RaceRunne Big Bore Shocks Red V2 - Set 4x1 x Rear Big Bore Shocks - Losi 5ive Black1 x Front Heavy Duty Baja Shock Shaft V2 - 8mm1 x Innovative-RC Muggy Chassis - Silver1 x MCD Fork Ends set 4 - M51 x 4-40x3/8 Button Head socket Screw - Bag 101 x O-Ring Diff Cups - 9.5mmx2.5mm1 x ProLux Stone Fuel Filter - RED1 x V3 Front Big Bore Shocks - Baja 5B 5T RED1 x 1x Losi 8ight-T Diff Cup - Silver1 x Outdrive cup shaft Orings1 x 26cc (34mm) Cylinder Head - 4 Bolt1 x 8x CEN Genesis Shock standoffs1 x HPI Baja Right Side Engine Mount Brace Black Anodized - 874901 x Rear Big Bore Shocks - Losi 5ive Red1 x Innovative-RC T-Shirt - Size Large1 x 6x Differential Gaskets1 x Baja Rear Lower Brace 2 - 874791 x Baja Diff bush - B0801 x 23cc & 26cc CrankCase Set - INC Bearings + Seals 2bolt1 x TurtleRacing Rear shock mounts1 x Losi 5T 5B Shock Towers Bash - Rear SILVER1 x IRC Front MID Front big bore springs - Losi 5T1 x 2x Flanged 10x6x3mm1 x Blue Big Bore shock Spring Retainers - Aluminium1 x Big Bore Shock Body All Colours - Losi Front1 x Motorex Air Filter Oil - spray1 x 23mm Heavy Duty wheel hex - 2x right Hand Nuts1 x Innovative-RC Hoodie - Size X Large1 x insulator gasket1 x 4-40x1/2 Socket Head Cap Screw - Bag 101 x Big Bore shock Spanner1 x IRC Red UHD Front big bore springs - Losi 5T1 x Innovative-RC Hoodie - Size XXX Large1 x IRC Red UHD rear big bore springs1 x Rear Plated Heavy Duty Baja Shock Shaft - 8mm1 x MCD & Savage Shock Spring -2.7mm1 x Flux Black Anodized 1"+6mm LCG TVP Kit1 x 1000mm (1M) Heavy Duty Servo Lead JR, Futaba, Hitec1 x Rear Heavy Duty Baja Shock Shaft - 8mm1 x 2x Losi LST1 & LST2 Diff Cup - Black
Reviews
V3 Rear Big Bore Shocks - Baja 5B 5T
V3 Rear Big Bore Shocks - Baja 5B 5T
127.62€

Love the V3 Big Bore Shocks(Nice Finish) very much and safe ...